ZyXEL Communications 4.04 Chapter 10 Configuration Commands, ZyWALL (ZyNOS) CLI Reference Guide, Table 27 config Command Summary (continued)

Chapter 10 Configuration Commands

Table 27 config Command Summary (continued)

COMMAND	DESCRIPTION	M
config delete firewall attack send-	Deletes the setting for whether an alert should be sent on	R+B
alert	registering an attack.
config delete firewall attack tcp-	Deletes the setting for DOS detection based on the	R+B
max-incomplete	maximum number of sessions allowed with the same
	destination host address.
config delete firewall e-mail	Removes all settings for e-mailing the firewall log.	R+B
config delete firewall e-mail day	Deletes the setting for which day the firewall log e-mail is	R+B
	sent.
config delete firewall e-mail	Deletes the setting for where the e-mail is sent to.	R+B
email-to
config delete firewall e-mail hour	Deletes the setting for which hour the e-mail is sent.	R+B
config delete firewall e-mail mail-	Deletes the setting for which e-mail server is used to send	R+B
server	the e-mail.
config delete firewall e-mail	Deletes the setting for which minute the e-mail is sent at.	R+B
minute
config delete firewall e-mail	Deletes the setting for the schedule for when the e-mail is	R+B
policy	sent.
config delete firewall e-mail	Deletes the setting for the return address for the e-mail log.	R+B
return-addr
config delete firewall e-mail	Deletes the setting for the subject of the e-mail log.	R+B
subject
config delete firewall set <set#>	Removes the specified set of rules applying to traffic from a	R+B
	given interface to another.
config delete firewall set <set#>	Deletes the setting for the connection time out for traffic to	R+B
connection-timeout	which this set applies. This command has no effect on
	firewall settings. To configure timeout values use tos
	commands
config delete firewall set <set#>	Deletes the setting for the default action for traffic to which	R+B
default-action	this set applies.
config delete firewall set <set#>	Deletes the setting for the wait time for FIN when	R+B
fin-wait-timeout	concluding a TCP session before it is terminated.
	This command has no effect on firewall settings. To
	configure timeout values use tos commands
config delete firewall set <set#>	Deletes the setting for the timeout for an idle ICMP session	R+B
icmp-timeout	before it is terminated.
	This command has no effect on firewall settings. To
	configure timeout values use tos commands
config delete firewall set <set#>	Deletes the log of traffic to which this set applies.	R+B
log
config delete firewall set <set#>	Deletes the name of a set.	R+B
name
config delete firewall set <set#>	Removes a specified rule in a set from the firewall	R+B
rule <rule#>	configuration.
config delete firewall set <set#>	Deletes whether a packet is permitted, dropped or rejected	R+B
rule <rule#> action	when it matches this rule.
config delete firewall set <set#>	Deletes whether a rule is enabled or not.	R+B
rule <rule#> active

	69
ZyWALL (ZyNOS) CLI Reference Guide