6

Bandwidth Management

Commands

Use these commands to configure bandwidth management (BWM) settings on the ZyWALL.

6.1 Command Summary

The following table describes the values required for many commands. Other values are discussed with the corresponding commands.

Table 19 Bm Class Command Input Values

LABEL

DESCRIPTION

<interface>

This is an interface name including lan, wan/wan1, dmz, wan2, wlan.

name <class-

This is a class name. Enter a descriptive name of up to 20 alphanumeric

name>

characters, including spaces.

class-number

This is a class number. Each class for each interface has an unique number.

 

The number format is "xx.xx.xx.xx...xx" and the range of xx is from 01 to 98.

 

Each ".xx” is a subclass. And the length of "xx.xx.xx.xx..." is the depth of this

 

class. Different model supports different class depth.

 

 

 

43

ZyWALL (ZyNOS) CLI Reference Guide