ZyXEL Communications 4.04 string, e, mail, timeout, Table 27 config Command Summary, Chapter 10 Configuration Commands, ZyWALL (ZyNOS) CLI Reference Guide

Chapter 10 Configuration Commands

Table 26 config Command Input Values

LABEL	DESCRIPTION
string, e-	< 31 ASCII characters.
mail
timeout	This is measured in seconds between 0~4294967295 seconds. Editing, deleting
	or inserting these values has no effect. To configure these timeout values use
	tos commands, as these are global settings.

The following section lists the commands for this feature.

Table 27 config Command Summary

COMMAND	DESCRIPTION	M
config cli	Displays the features you can configure with the config	R+B
	command.
config delete anti-spam blackRule	Removes the antispam blacklist. The blacklist is a list of IP	R+B
	addresses of known spammers to be blocked.
config delete anti-spam whiteRule	Removes the antispam whitelist. The whitelist is a list of IP	R+B
	addresses known to be safe.
config delete custom-service	Deletes the specified custom service entry.	R+B
<entry#>
config delete custom-service	Deletes the ICMP code. This field is optional for ICMP. The	R+B
<entry#> icmp-code	code and type of an ICMP packet together indicate the
	purpose of the packet.
config delete custom-service	Deletes the ICMP type.	R+B
<entry#> icmp-type
config delete custom-service	Deletes the IP protocol for a selected custom service.	R+B
<entry#> ip-protocol
config delete custom-service	Deletes the name of the selected custom service.	R+B
<entry#> name
config delete custom-service	Deletes the port range setting for the custom service.	R+B
<entry#> range
config delete custom-service	Deletes the IP protocol setting for the custom service.	R+B
<entry#> user-defined-ip
config delete firewall active	Deletes the active setting in the firewall rule configuration.	R+B
config delete firewall attack block	Deletes the block setting in the firewall rule configuration.	R+B
config delete firewall attack	Deletes the block attack in minutes setting in the firewall	R+B
block-minute	rule configuration.
config delete firewall attack max-	Deletes the setting for DOS (Denial of Service) detection	R+B
incomplete-high	based on the maximum number of sessions allowed.
config delete firewall attack max-	When the ZyWALL detects a DOS attack it begins to delete	R+B
incomplete-low	half-open sessions until it reaches a specified number of
	half-open sessions. This commands deletes this set
	number.
config delete firewall attack	Deletes the setting for DOS detection based on the	R+B
minute-high	maximum number of sessions allowed per minute.
config delete firewall attack	When the ZyWALL detects a DOS attack it begins to delete	R+B
minute-low	half-open sessions until it reaches a specified number of
	half-open sessions per minute. This commands deletes this
	set number.

68
	ZyWALL (ZyNOS) CLI Reference Guide