Chapter 2 Common Commands

Use the following command to view the ZyWALL’s time and date.

ras> sys datetime time Current time is 08:26:56 ras> sys datetime date Current date is Wed 2007/08/08 ras>

Use the following command to restart your ZyWALL right away.

ras> sys reboot

Bootbase Version: V1.08 01/28/2005 14:47:16

RAM:Size = 32 Mbytes

FLASH: Intel 64M

ZyNOS Version: V4.03(XD.0)Preb2_0802_1 08/03/2007 16:48:04

Press any key to enter debug mode within 3 seconds.

............................................................

Use the following command to reset the ZyWALL to the factory defaults. Make sure you back up your current configuration first (using the web configurator or SMT). The ZyWALL will restart and the console port speed will also reset to 9,600 bps.

ras> sys romreset

Do you want to restore default ROM file(y/n)?y

..................................................................OK

System Restart! (Console speed will be changed to 9600 bps)

Bootbase Version: V1.08 01/30/2005 14:41:51

RAM:Size = 64 Mbytes

FLASH: Intel 128M

ZyNOS Version: V4.03(WZ.0)Preb2_0803 08/03/2007 11:08:13

Press any key to enter debug mode within 3 seconds.

............................................................

Use the following command to change the console port speed. A higher console port speed is recommended when uploading firmware via the console port. A console port speed of 115,200 bps is necessary to view CNM debug messages and packet traces on the ZyWALL.

ras> sys baud ?

Usage: baud <1..5>(1:38400, 2:19200, 3:9600, 4:57600, 5:115200) ras> sys baud 5

Saving to ROM. Please wait...

Change Console Speed to 115200. Then hit any key to continue ras>

22

 

ZyWALL (ZyNOS) CLI Reference Guide