ZyXEL Communications 4.04 10.2 Default Values, Table 28 config Default Values, Chapter 10 Configuration Commands, ZyWALL (ZyNOS) CLI Reference Guide

Chapter 10 Configuration Commands

Table 27 config Command Summary (continued)

COMMAND	DESCRIPTION	M
config edit firewall set <set#>	Edits the timeout for an idle UDP session before it is	R+B
udp-idle-timeout <timeout>	terminated.
	This command has no effect on firewall settings. To
	configure timeout values use tos commands.
config insert firewall set <set#>	Inserts s new rule into a set. Use config edit commands	R+B
rule <rule#>	to edit the rule and set subfields.
config retrieve anti-spam	Retrieves the current saved anti-spam settings.	R+B
config retrieve custom-service	Retrieves the custom service entry specified by <entry#>.	R+B
<entry#>
config retrieve firewall	Retrieves current saved firewall settings.	R+B
config save all	Saves users’ configurations into flash memory.	R+B
config save anti-spam	Saves the current antispam settings.	R+B
config save custom-service	Saves the custom service entry specified by <entry#>.	R+B
<entry#>
config save firewall	Saves the current firewall settings.	R+B

10.2 Default Values

The following table shows a list of default values.

Table 28 config Default Values

VARIABLE	DEFAULT VALUE
ACL set name:	“ACL Default Set”
anti-spam action <01>	1
anti-spam blackRule <01>	0
anti-spam markString <spam-tag>	“SPAM”
anti-spam phishingString <phishing-tag>	“PHISHING”
anti-spam query <01>	0
anti-spam switch <01>	0
anti-spam threshold <threshold>	90
anti-spam whiteRule <01>	0
connection-timeout	30 seconds
fin-wait-timeout	60 seconds
firewall active <yesno>	yes
firewall attack block <yesno>	no
firewall attack block-minute <0~255>	10
firewall attack max-incomplete-high <0~255>	100
firewall attack max-incomplete-low <0~255>	80
firewall attack minute-high <0~255>	100
firewall attack minute-low <0~255>	80
firewall attack send-alert <yesno>	no

76
	ZyWALL (ZyNOS) CLI Reference Guide