
Chapter 2 Common Commands
You may also configure and schedule new policies using commands as well as configure what to block using the external database.
2.5 Firewall
Use the following command to enable the firewall on the ZyWALL.ras> sys firewall active yes ras>
2.6 VPN
Use the following command to show what IPsec VPN tunnels are active on your ZyWALL.
ras> ipsec show_runtime sa Runtime SA status:
No phase 1 IKE SA exist
No phase 2 IPSec SA exist
Active SA pair = 0
ras>
Use the following command to manually bring up a previously configured VPN tunnel.
ras> ipsec dial 1
Start dialing for tunnel <rule# 1>...
.....................
2.7 Dialing PPPoE and PPTP Connections
This example shows dialing up remote node “WAN 1” using PPPoE.ras> poe dial "WAN 1"
Start dialing for node <WAN 1>...
###Hit any key to continue.###
$$$ DIALING dev=6 ch=0..........
$$$
$$$ CALL CONNECT speed<100000000> type<6> chan<0>
$$$ LCP opened
$$$ PAP sending user/pswd
$$$ IPCP negotiation started
$$$ IPCP neg' Primary DNS 192.168.30.1
$$$ IPCP neg' Primary DNS 172.16.5.2
$$$ IPCP opened
| 29 |
ZyWALL (ZyNOS) CLI Reference Guide | |
|
|