Document Conventions

 

Table 2 Common Command Input Values (continued)

 

LABEL

DESCRIPTION

 

interface

An interface on the ZyWALL. Use the following for a ZyWALL with a single WAN

 

 

Ethernet interface.

 

 

enif0: LAN

 

 

enif1: Ethernet WAN

 

 

enif2: DMZ

 

 

enif4: Ethernet WLAN

 

 

wanif0: PPPoE or PPTP or 3G depending on which is connected first

 

 

wanif1: PPPoE or PPTP or 3G depending on which is connected second

 

 

Use the following for a ZyWALL with two WAN Ethernet interfaces.

 

 

enif0: LAN

 

 

enif1: Ethernet WAN 1

 

 

enif2: DMZ

 

 

enif3: Ethernet WAN 2

 

 

enif5: Ethernet WLAN

 

 

wanif0: PPPoE or PPTP or 3G depending on which is connected first

 

 

wanif1: PPPoE or PPTP or 3G depending on which is connected second

 

 

For some commands you can also add a colon and a 0 or 1 to specify an IP alias.

 

 

This is only for the LAN, DMZ, and WLAN interfaces. For example, enif0:0

 

 

specifies LAN IP alias 1 and enif0:1 specifies LAN IP alias 2.

 

 

 

 

hostname

Hostname can be an IP address or domain name.

 

 

 

 

name

Used for the name of a rule, policy, set, group and so on.

 

 

 

 

number

Used for a number, for example 10, that you have to input.

 

 

 

"Commands are case sensitive! Enter commands exactly as seen in the command interface. Remember to also include underscores if required.

Copy and Paste Commands

You can copy and paste commands directly from this document into your terminal emulation console window (such as HyperTerminal). Use right-click (not ctrl-v) to paste your command into the console window as shown next.

 

7

ZyWALL (ZyNOS) CLI Reference Guide