ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch

Menu 21.1.1 - TCP/IP Filter Rule

Filter #: 1,1

Filter Type= TCP/IP Filter Rule

Active= Yes

IP Protocol= 6 IP Source Route= No

Destination: IP Addr= 0.0.0.0

IP Mask= 0.0.0.0

Port #= 137

Port # Comp= Equal

Source: IP Addr= 0.0.0.0

IP Mask= 0.0.0.0

 

 

 

Port #=

 

 

 

 

 

Port # Comp= None

 

 

 

 

TCP Estab= No

 

 

 

 

More= No

Log= None

 

 

 

 

Action Matched= Drop

 

 

 

 

Action Not Matched= Check Next Rule

 

 

 

 

Press ENTER to Confirm or ESC to Cancel:

 

 

 

 

 

 

 

 

 

Figure 7-7 Menu 21.1.1 – TCP/IP Filter Rule

 

 

The following table describes how to configure your TCP/IP filter rule.

 

 

 

 

Table 7-3 TCP/IP Filter Rule Menu Fields

 

 

 

 

 

 

 

 

FIELD

 

DESCRIPTION

EXAMPLE

 

 

 

 

 

Filter #

This is the filter set, filter rule coordinates, for instance, 2, 3

1,1

 

 

refers to the second filter set and the third filter rule of that

 

 

 

 

set.

 

 

 

Filter Type

Press [SPACE BAR] and the [ENTER] to select filter type.

TCP/IP Filter

 

 

Choices are TCP/IP Filter Rule or Generic Filter Rule.

Rule

 

 

 

 

(default)

 

 

 

 

 

Active

Select Yes to activate or No to deactivate the filter rule.

No

 

 

 

 

(default)

 

 

 

 

 

IP Protocol

This is the upper layer protocol, for example, TCP is 6, UDP

0 to 255

 

 

is 17 and ICMP is 1. The value must be between 0 and 255.

 

 

 

 

A value of 0 matches ANY protocol.

 

 

 

 

 

 

 

 

Filter Configuration

7-7