ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch

User-Defined Address Mapping Sets

Now let’s look at option 1 in menu 15.1. Enter 1 to bring up this menu. We’ll just look at the differences from the previous menu. Note the extra Action and Select Rule fields mean you can configure rules in this screen. Note also that the “?” in the Set Name field means that this is a required field and you must enter a name for the set.

Menu 15.1.1 - Address Mapping Rules

Set Name= ?

Idx Local Start IP Local End IP

Global Start IP Global End IP

Type

------------------ --------------- --------------- --------------- ------

1.

2

3.

4.

5.

6.

7.

8.

9.

10.

Action= Edit

Select Rule=

Press ENTER to Confirm or ESC to Cancel:

Figure 6-8 Menu 15.1.1 - First Set

The table below describes the fields for configuration in this screen.

Table 6-5 Fields in Menu 15.1.1

FIELD

DESRIPTION

EXAMPL

 

 

E

 

 

 

Set Name

Enter a name for this set of rules. This is a required field. If this field is left

NAT_SET

 

blank, the entire set will be deleted.

 

 

 

 

Action

The default is Edit. Edit means you want to edit a selected rule (see following

Edit

 

field). Insert Before means to insert a rule before the rule selected. The rules

 

 

after the selected rule will then be moved down by one rule. Delete means to

 

 

delete the selected rule and then all the rules after the selected one will be

 

 

advanced one rule. None disables the Select Rule item.

 

Select

When you choose Edit, Insert Before or Delete in the previous field the

1

Rule

cursor jumps to this field to allow you to select the rule to apply the action in

 

 

question.

 

 

 

 

6-10

NAT