ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch

3.10 Internet Access Setup

From the main menu, type 4 to display Menu 4 – Internet Access Setup, as shown next.

Menu 4 - Internet Access Setup

ISP's Name= ChangeMe

Encapsulation= Ethernet

Service Type= Standard

My Login= N/A

My Password= N/A

Login Server= N/A

IP Address Assignment= Dynamic

IP Address= N/A

IP Subnet Mask= N/A

Gateway IP Address= N/A

Network Address Translation= SUA Only

Press ENTER to Confirm or ESC to Cancel:

Figure 3-7 Internet Access Setup

The following table contains instructions on how to configure your ZyAIR for Internet access.

Table 3-5 Internet Access Setup Menu Fields

FIELD

DESCRIPTION

EXAMPLE

 

 

 

ISP’s Name

Enter the name of your Internet Service Provider. This information is

MyISP

 

for identification purposes only.

 

Encapsulation

Press [SPACE BAR] to select the method of encapsulation used

Ethernet

 

by your ISP. Choices are PPPoE, PPP or Ethernet.

 

Service Type

This field is available if you select the Ethernet encapsulation.

Standard

 

Press [SPACE BAR] to select the service type then press [ENTER].

 

 

Choose a RoadRunner flavor if your ISP is using Time Warner's

 

 

RoadRunner; otherwise choose Standard. The User Name,

 

 

Password and Login Server fields are not applicable (N/A) for the

 

 

latter.

 

 

Choose from Standard, Telstra (RoadRunner Telstra or BigPond

 

 

authentication method), RR-Manager(RoadRunner Manager

 

 

authentication method) or RR-Toshiba(RoadRunner Toshiba

 

 

authentication method).

 

3-12

Internet Access