ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch

Chapter 11

System Maintenance and Information

This chapter leads you through SMT menus 24.8 to 24.11.

11.1 Command Interpreter Mode

The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of the same functionality as the SMT, while adding some low-level setup and diagnostic functions. Enter the CI from the SMT by selecting menu 24.8. See the included disk or the zyxel.com web site for more detailed information on CI commands. Enter 8 from Menu 24 – System Maintenance. A list of valid commands can be found by typing help or ? at the command prompt. Type exit to return to the SMT main menu when finished.

Menu 24 - System Maintenance

1.System Status

2.System Information and Console Port Speed

3.Log and Trace

4.Diagnostic

5.Backup Configuration

6.Restore Configuration

7.Upload Firmware

8.Command Interpreter Mode

9.Call Control

10.Time and Date Setting

11.Remote Management Setup

Enter Menu Selection Number:

Figure 11-1 Menu 24 – System Maintenance

Copyright (c) 1994 - 2002 ZyXEL Communications Corp.

ras> ?

 

 

 

Valid commands are:

device

ether

sys

exit

poe

pptp

config

wlan

radius

ip

ppp

bridge

hdap

8021x

 

 

ras>

 

 

 

Figure 11-2 Valid CI Commands

System Maintenance and Information

11-1