ZyAIR
Please note that if there is no activity for longer than five minutes (default timeout
period) after you log in, your ZyAIR will automatically log you out.
The remainder of this user’s guide shows you how to configure the ZyAIR for Internet access using SMT screens through the console port. There are also some sections in this guide that focus on using Telnet to configure the ZyAIR.
2.5.4 Initial Screen
When you turn on your ZyAIR, it performs several internal tests as well as line initialization. After the initialization, the ZyAIR asks you to press [ENTER] to continue, as shown.
Copyright (c) 1994 - 2002 ZyXEL Communications Corp. initialize ch =0, ethernet address: 00:A0:C5:00:15:37 initialize ch =1, ethernet address: 00:A0:C5:00:15:38 initialize ch =2, ethernet address: 00:A0:C5:00:15:37 Press ENTER to continue...
Figure 2-3 Power-On Display
2.5.5 Entering Password
The login screen appears after you press [ENTER], prompting you to enter the password, as shown next.
For your first login, enter the default password “1234”. As you type the password, the screen displays an “x” for each character you type.
Please note that if there is no activity for longer than five minutes after you log in, your ZyAIR will automatically log you out and will display a blank screen. If you see a blank screen, press [ENTER] to display the login screen again.
Enter Password : xxxx
Figure 2-4 Login Screen
Hardware Installation and Initial Setup |