
ZyAIR
Step 1. From the main menu, enter 3 to display Menu 3 – Lan Setup.
Step 2. Enter 5 to display Menu 3.5 – Wireless LAN Setup.Menu 3.5 - Wireless LAN Setup
ESSID= 432545
Hide ESSID= No
Channel ID= CH11 2462MHz
RTS Threshold= 2432
Frag. Threshold= 2432
WEP= Disable
Default Key= N/A
Key1= N/A
Key2= N/A
Key3= N/A
Key4= N/A
Edit MAC Address Filter= No
Edit Roaming Configuration= No
FigureThe following table describes the WEP related fields in this screen. For wireless LAN field descriptions refer to section on Wireless LAN Setup.
TableFIELD | DESCRIPTION | EXMAPLE |
|
|
|
| WEP (Wired Equivalent Privacy) provides data encryption to prevent unauthorized | Disable |
| wireless stations from accessing data transmitted over the wireless network. |
|
WEP | Select Disable to allow wireless clients to communicate with the access points |
|
| without any data encryption. |
|
| Select |
|
Default | Enter the key number (1 to 4) in this field. Only one key cab be enabled at any | 1 |
Key | one time. |
|
| If you chose |
|
| characters (ASCII string) or 10 hexadecimal digits |
|
| for each key. |
|
Key 1 to | If you chose |
|
Key 4 | (ASCII string) or 26 hexadecimal digits |
|
|
| |
| There are four data encryption keys to secure your data from eavesdropping by |
|
| unauthorized wireless users. The values for the keys must be set up exactly the |
|
| same on the access points as they are on the wireless client computers. |
|
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
Wireless LAN Security Setup |