ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch

Move the cursor to the Edit IP field, press [SPACE BAR] to select Yes, then press [ENTER] to display Menu 11.3 – Remote Node Network Layer Options shown below.

Menu 11.3 - Remote Node Network Layer Options

IP Address Assignment= Static

Rem IP Addr= 0.0.0.0

Rem Subnet Mask= 0.0.0.0

My WAN Addr= 0.0.0.0

Network Address Translation= None

Metric= 1

Private= No

RIP Direction= None

Version= N/A

Multicast= None

Enter here to CONFIRM or ESC to CANCEL:

Figure 5-2 Remote Node Network Layer Options

The next table explains fields in Menu 11.3 - Remote Node Network Layer Options.

Table 5-2 Remote Node Network Layer Options

FIELD

DESCRIPTITON

EXAMPLE

 

 

 

IP Address

Press [SPACE BAR] and then [ENTER] to select Dynamic if the remote

Static

Assignment

node is using a dynamically assigned IP address or Static if it is using a

 

 

static (fixed) IP address. You will only be able to configure this in the

 

 

ISP node (also the one you configure in menu 4), all other nodes are

 

 

set to Static.

 

Rem IP Addr

This is the IP address you entered in the previous menu.

 

 

 

 

Rem Subnet

Type the subnet mask assigned to the remote node.

 

Mask

 

 

 

 

 

My WAN Addr

Some implementations, especially UNIX derivatives, require separate

 

 

IP network numbers for the WAN and LAN links and each end to have a

 

 

unique address within the WAN network number. In that case, type the

 

 

IP address assigned to the WAN port of your ZyAIR.

 

 

 

 

Network

Press [SPACE BAR] and then [ENTER] to select Full Feature if you

Full

Address

have multiple public WAN IP addresses for your ZyAIR.

Feature

Translation

 

 

Remote Node Configuration

5-5