
ZyAIR
| Table |
|
|
FIELD | DESCRIPTION |
|
|
ZyNOS F/W Version | Refers to the ZyNOS (ZyXEL Network Operating System) system firmware |
| version. ZyNOS is a registered trademark of ZyXEL Communications |
| Corporation. |
|
|
LAN |
|
|
|
Ethernet Address | Refers to the Ethernet MAC (Media Access Control) of your ZyAIR. |
|
|
IP Address | This is the IP address of the ZyAIRe in dotted decimal notation. |
|
|
IP Mask | This shows the subnet mask of the ZyAIR. |
|
|
DHCP | This field shows the DHCP setting of the ZyAIR. |
|
|
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
9.2.2 Console Port Speed
You can set up different port speeds for the console port through Menu 24.2.2 – System Maintenance – Console Port Speed. Your ZyAIR supports 9600 (default), 19200, 38400 and 57600bps console port speeds. Press [SPACE BAR] and then [ENTER] to select the desired speed in menu 24.2.2, as shown in the following figure.
Menu 24.2.2 – System Maintenance – Change Console Port Speed
Console Port Speed: 9600
Press ENTER to Confirm or ESC to Cancel:
Figure 9-5 Menu 24.2.2 – System Maintenance – Change Console Port Speed
After you changed the console port speed on your ZyAIR, you must also make the same change to the console port speed parameter of your communication software.
9.3Log and Trace
There are two logging facilities in the ZyAIR. The first is the error logs and trace records that are stored locally. The second is the UNIX syslog facility for message logging.
System Information and Diagnosis |