Chapter 22 SNMP
Table 45 Community Name (continued)
LABEL | DESCRIPTION |
Rights | This field displays the community string’s rights. This will be Read Only |
| or Read Write. |
|
|
Network ID of | This field displays the IP address of the remote SNMP management |
Trusted Host | station after it has been modified by the subnet mask. |
|
|
Subnet Mask | This field displays the subnet mask for the IP address of the remote SNMP |
| management station. |
|
|
Action | Click Delete to remove a specific Community String. |
|
|
22.6 Trap Receiver
Use the Trap Receiver screen to enable the sending of SNMP traps to a remote SNMP management station(s). Click Management > SNMP > Trap Receiver to view the screen as shown.
SNMP traps are used to send out SNMP notifications of urgent or normal events in the system to external management stations.
Figure 80 Trap Receiver
The following table describes the labels in this screen.
Table 46 Trap Receiver
LABEL | DESCRIPTION |
IP Address | Enter the IP address of the remote trap station in dotted decimal |
| notation. |
|
|
Version | Select the version of the Simple Network Management Protocol to use. v1 |
| or v2c. |
|
|
Community | Specify the community string used with this remote trap station. |
String |
|
|
|
Apply | Click this to save any changes to the Switch. |
|
|
Refresh | Click this to reset the contents of the text boxes. |
|
|
Trap Receiver |
|
List |
|
|
|
140 |
| |
GS1510 Series User’s Guide |
| |
|
|
|