Chapter 10 VLAN
10.6 Tag Settings
Use this screen to tag any outgoing frames from a port with its assigned VLAN ID. You must first configure a VLAN (Section 10.5 on page 67) before using this screen. Click Advanced Settings > VLAN > VLAN > Tag Settings to display the following screen.
Figure 36 Tag Settings
The following table describes the labels in this screen.
Table 14 Tag Settings
LABEL | DESCRIPTION |
VLAN ID | Select a VLAN ID to configure its port tagging settings. |
|
|
Tag Port | Selecting a port which is a member of the selected VLAN ID will make it a |
| tag port. This means the port will tag all outgoing frames transmitted with |
| the VLAN ID. |
|
|
Select All | Click Select All to mark all member ports as tag ports. |
|
|
Deselect All | Click Deselect All to mark all member ports as untag ports. |
|
|
Apply | Click this to save any changes to the Switch. |
|
|
Refresh | Click this to reload the screen and reset any changes that were just made. |
|
|
Tag Status |
|
|
|
VLAN ID | This field displays the VLAN ID. |
|
|
Tag Ports | This field displays the ports that have been assigned as tag ports. |
|
|
UnTag Ports | This field displays the ports that have been assigned as untag ports. |
|
|
68 |
| |
GS1510 Series User’s Guide |
| |
|
|
|