6
General Settings
This chapter describes the General Settings screens in the Basic Settings menu.
6.1What You Can Do
•Use the System screen (Section 6.2 on page 47) to configure the basic IP address settings for the Switch.
•Use the Jumbo Frame screen (Section 6.3 on page 48) to configure the jumbo frame size the Switch accepts.
•Use the SNTP screen (Section 6.4 on page 49) to configure the date and time of the Switch.
6.2System
Use the System Settings screen under Basic Settings > General Settings to set up the IP address for the Switch. You can enable DHCP or set up a static IP address. The following screen appears when you click Basic Settings > General Settings
>System.
Figure 26 System Settings
| 47 |
GS1510 Series User’s Guide | |
|
|