Chapter 13 Link Aggregation

The following table describes the labels in this screen.

Table 19 Static Trunk

LABEL

DESCRIPTION

Group State

Select the group ID to use for this trunk group, that is, one logical link

 

containing multiple ports.

 

Select Enable to use this static trunk group.

 

 

Member

Select the ports to be added to the static trunk group.

Ports

 

 

 

Select All

Click this to select all ports as members of the static trunk group.

 

 

Deselect All

Click this to deselect all ports as members of the trunk gorup.

 

 

Apply

Click Apply to save your changes to the Switch.

 

 

Refresh

Click Refresh to begin configuring this screen afresh.

 

 

Group ID

This field displays the group ID to identify a trunk group, that is, one logical

 

link containing multiple ports.

 

 

State

This field displays if the trunk group is enabled or disabled.

 

 

Member

This field displays the assigned ports that comprise the static trunk group.

Ports

 

 

 

13.5 LACP

Click Advanced Settings > Link Aggregation > LACP to display the following screen. See Section 13.3.1 on page 77 for more information on dynamic link aggregation.

Figure 42 LACP

 

79

GS1510 Series User’s Guide