Chapter 13 Link Aggregation

The following table describes the labels in this screen.

Table 20 LACP

LABEL

DESCRIPTION

State

Select Enable from the drop down box to enable Link Aggregation Control

 

Protocol (LACP).

 

Select Disable to not use LACP.

 

 

System

LACP system priority is a number between 1 and 65,535. The switch with

Priority

the lowest system priority (and lowest port number if system priority is the

 

same) becomes the LACP “server”. The LACP “server” controls the

 

operation of LACP setup. Enter a number to set the priority of an active port

 

using Link Aggregation Control Protocol (LACP). The smaller the number,

 

the higher the priority level.

 

 

Group LACP

Select a trunk group ID and then select whether to Enable or Disable

 

Group Link Aggregation Control Protocol for that trunk group.

 

 

Apply

Click Apply to save your changes to the Switch.

 

 

Refresh

Click Refresh to begin configuring this screen afresh.

 

 

Group ID

The field identifies the link aggregation group, that is, one logical link

 

containing multiple ports.

 

 

LACP State

This field displays if the group has LACP enabled.

 

 

80

 

GS1510 Series User’s Guide