Chapter 8 Port Mirroring

The following table describes the labels in this screen.

Table 10

Port Mirroring

LABEL

DESCRIPTION

State

Select Enabled to turn on port mirroring or select Disabled to turn it off.

 

 

Monitor

Select the ports for which you want to monitor the traffic.

to Port

 

 

 

All Ports

Settings in this field apply to all ports.

 

Use this field only if you want to make some settings the same for all ports.

 

Use this field first to set the common settings and then make adjustments on

 

a port-by-port basis.

 

 

Source

This field displays the number of a port.

Port

 

 

 

Mirror

Select Ingress, Egress or Both to only copy the ingress (incoming), egress

Mode

(outgoing) or both (incoming and outgoing) traffic from the source ports to

 

the port specified in the Monitor to Port field. Select Disable to not copy

 

any traffic from the source ports to the port specified in the Monitor to Port

 

field.

 

 

Apply

Click Apply to save your changes back to the Switch.

 

 

Refresh

Click Refresh to begin configuring this screen afresh.

 

 

56

 

GS1510 Series User’s Guide