Chapter 9 Port Settings

The following table describes the labels in this screen.

Table 11 Port Settings

LABEL

DESCRIPTION

Port Settings

 

 

 

Port

Select a port number you want to configure on this screen.

 

 

State

Select Enable to activate the port or Disable to deactivate the port.

 

 

Speed/Duplex

Select the speed and duplex mode of the port. The choices are:

 

• Auto

 

• 10 Mbps / Full Duplex

 

• 10 Mbps / Half Duplex

 

• 100 Mbps / Full Duplex

 

• 100 Mbps / Half Duplex

 

• 1000 Mbps / Full Duplex

 

• 1000 Mbps / Half Duplex

 

 

Flow Control

Select On to enable access to buffering resources for the port thus

 

ensuring lossless operation across network switches. Otherwise, select

 

Off to disable it.

 

 

Apply

Click Apply to save the changes back to the Switch.

 

 

Refresh

Click Refresh to begin configuring this screen afresh.

 

 

Port Status

 

 

 

Port

This field displays the port number.

 

 

State

This field displays whether the port is enabled or disabled.

 

 

Speed/Duplex

This field displays the speed either 10M, 100M or 1000M and the duplex

 

mode Full or Half.

 

 

Flow Control

This field displays whether the port’s flow control is On or Off.

 

 

Link Status

This field displays the link status of the port. If the port is up, it displays

 

the port’s speed, duplex and flow control setting. Otherwise, it displays

 

Link Down if the port is disabled or not connected to any device.

 

 

 

59

GS1510 Series User’s Guide