Chapter 16 Storm Control
The following table describes the labels in this screen.
Table 26 Broadcast Storm Control
LABEL | DESCRIPTION |
Storm Control Settings | |
|
|
Port | Select the port number for which you want to configure storm control |
| settings. |
|
|
Rate | Select the number of packets (of the type specified in the Type field) per |
| second the Switch can receive per second. |
|
|
Type | Select |
| Broadcast - to only specify a limit for the amount of broadcast packets |
| received per second. |
| Multicast - to only specify a limit for the amount of multicast packets |
| received per second. |
| DLF - to only specify a limit for the amount of DLF packets received per |
| second. |
| Bcast+Mcast - to specify a limit for the amount of broadcast and |
| multicast packets received per second. |
| Mcast+DLF - to specify a limit for the amount of multicast and DLF |
| packets received per second. |
| Bcast+DLF - to specify a limit for the amount of broadcast and DLF |
| packets received per second. |
| Bcast+Mcast+DLF - to specify a limit for the amount of broadcast, |
| multicast and DLF (Destination Lookup Failure) packets received per |
| second. |
|
|
Apply | Click Apply to save your changes. |
|
|
Refresh | Click Refresh to begin configuring this screen afresh. |
|
|
Storm Control Status | |
|
|
Port | This field displays the number of a port. |
|
|
Rate (pps) | This field displays the number of packets (of the type displayed in the |
| Type field) per second the Switch can receive per second. |
|
|
Type | This field displays the packet types that the limit (of the rate displayed in |
| the Rate field) is applied on the Switch. |
|
|
94 |
| |
GS1510 Series User’s Guide |
| |
|
|
|