Chapter 15 QoS
The following table describes the labels in this screen.
Table 23 IP DiffServ (DSCP)
LABEL | DESCRIPTION |
Mode | Select Tag Over DSCP if you want to use 802.1p Priority in packets to |
| prioritize traffic. Select DSCP Over Tag if you want to use DSCP priority to |
| prioritize traffic, even if the packet has an IEEE 802.1p priority tag. |
|
|
DSCP | This field displays the number of each DSCP service level. |
|
|
Priority | Select the IEEE 802.1p priority you want to assign to the packets with the |
| DSCP service level. |
| Note: The changes are not applied until you click Apply. |
Apply | Click Apply to save the changes back to the Switch. |
|
|
Refresh | Click Refresh to begin configuring this screen afresh. |
15.6 Priority/Queue Mapping
Use the Priority/Queue Mapping Settings screen to configure IEEE 802.1p priority and queue mappings for the Switch. Click Advanced Settings > QoS > Priority/Queue Mapping to open the following screen.
Figure 49 Priority/Queue Mapping
| 89 |
GS1510 Series User’s Guide | |
|
|