Chapter 19 CWMP
19.2 The CWMP Setup Screen
Use this screen to configure your ZyXEL Device to be managed by a management server. Click Access Management > CWMP to display the following screen.
Figure 69 Access Management > CWMP
The following table describes the fields in this screen.
Table 40 Access Management > CWMP
LINK | DESCRIPTION |
CWMP Setup |
|
|
|
CWMP | Select Activated to allow the ZyXEL Device to be managed by a management server |
| or select Deactivated to not allow the ZyXEL Device to be managed by a |
| management server. |
|
|
Login ACS | Configure this part of the screen to log into the management server. |
|
|
URL | Type the IP address or domain name of the management server. If the ZyXEL Device |
| is behind a NAT router that assigns it a private IP address, you will have to configure a |
| NAT port forwarding rule on the NAT router. |
|
|
User Name | The user name is used to authenticate the ZyXEL Device when making a connection |
| to the management server. This user name on the management server and the ZyXEL |
| Device must be the same. Type a user name of up to 255 printable characters found |
| on an |
| allowed. |
|
|
Password | The password is used to authenticate the ZyXEL Device when making a connection to |
| the management server. This password on the management server and the ZyXEL |
| Device must be the same. Type a password of up to 255 printable characters found on |
| an |
|
|
Connection | Use this part of the screen to allow the management server to connect to the ZyXEL |
Request | Device after a successful login. |
|
|
Path | Type the IP address or domain name of the ZyXEL Device. The management server |
| uses this path to verify the ZyXEL Device. |
|
|
132 |
| |
| ||
|
|
|