|
| Chapter 19 CWMP |
| Table 40 Access Management > CWMP (continued) | |
| LINK | DESCRIPTION |
| Port | The default port for access to the ZyXEL Device from the management server is the |
|
| HTTP port, port 80. If you change it, make sure it does not conflict with another port on |
|
| your network and it is recommended to use a port number above 1024 (not a |
|
| commonly used port). The management server should use this port to connect to the |
|
| ZyXEL Device. You may need to alter your NAT port forwarding rules if they were |
|
| already configured. |
|
|
|
| UserName | The user name is used to authenticate the management server when connecting to |
|
| the ZyXEL Device. Type a user name of up to 255 printable characters found on an |
|
| |
|
| allowed. |
|
|
|
| Password | The password is used to authenticate the management server when connecting to the |
|
| ZyXEL Device. Type a password of up to 255 printable characters found on an |
|
| |
|
|
|
| Periodic | Select Activated to have the ZyXEL Device periodically send information to the |
| Inform | management server (recommended if CWMP is enabled) or select Deactivated to not |
|
| have the ZyXEL Device periodically send information to the management server |
|
|
|
| Interval | The interval is the duration in seconds for which the ZyXEL Device must attempt to |
|
| connect with the management server to send information and check for configuration |
|
| updates. Enter a value between 1 and 86400 seconds. |
|
|
|
| SAVE | Click this to save your changes. |
|
|
|
| CANCEL | Click this to restore your previously saved settings. |
|
|
|
| 133 |
|
|