Chapter 9 Static Route
9.2 The Routing Table List Screen
Use this screen to view the static route rules. Click Advanced Setup > Routing to display the following screen.
Figure 32 Advanced Setup > Routing Table List
The following table describes the labels in this screen.
Table 19 Advanced Setup > Routing Table List
LABEL | DESCRIPTION |
# | This is the number of an individual static route. |
|
|
Dest IP | This parameter specifies the IP network address of the final destination. Routing is |
| always based on network number. |
|
|
Mask | This parameter specifies the IP network subnet mask of the final destination. |
|
|
Gateway IP | This is the IP address of the gateway. The gateway is a router or switch on the same |
| network segment as the device's LAN or WAN port. The gateway helps forward |
| packets to their destinations. |
|
|
Metric | This field displays the priority of each route on the ZyXEL Device. |
|
|
Device | This is the name that describes or identifies this route. |
|
|
Use | This is the number of times the route was used. |
|
|
Edit | Click this to go to the screen where you can set up a static route on the ZyXEL |
| Device. You cannot edit the default routes. |
|
|
Drop | Click this to remove a static route from the ZyXEL Device. You cannot delete the |
| default routes. |
|
|
ADD ROUTE | Click this to add a new static route on the ZyXEL Device. |
|
|
9.2.1 The Static Route Screen
Use this screen to configure the required information for a static route. Select a static route index number and click Edit, or click the ADD ROUTE button in the Routing Table List screen. The screen shown next appears.
Figure 33 Advanced > Routing > Static Route
78 |
| |
| ||
|
|
|