Chapter 10 Network Address Translation (NAT)

Note that inside/outside refers to the location of a host, while public/local refers to the IP address of a host used in a packet. Thus, an inside local address is the IP address of an inside host in a packet when the packet is still in the local network, while an inside public address is the IP address of the same inside host when the packet is on the WAN side. The following table summarizes this information.

Table 26 NAT Definitions

ITEM

DESCRIPTION

Inside

This refers to the host on the LAN.

 

 

Outside

This refers to the host on the WAN.

 

 

Local

This refers to the packet address (source or destination) as the packet travels on the

 

LAN.

 

 

Public

This refers to the packet address (source or destination) as the packet travels on the

 

WAN.

 

 

NAT never changes the IP address (either local or public) of an outside host.

10.6.2 What NAT Does

In the simplest form, NAT changes the source IP address in a packet received from a subscriber (the inside local address) to another (the inside public address) before forwarding the packet to the WAN side. When the response comes back, NAT translates the destination address (the inside public address) back to the inside local address before forwarding it to the original inside host. Note that the IP address (either local or public) of an outside host is never changed.

The public IP addresses for the inside hosts can be either static or dynamically assigned by the ISP. In addition, you can designate servers, for example, a web server and a telnet server, on your local network and make them accessible to the outside world. If you do not define any servers, NAT offers the additional benefit of firewall protection. With no servers defined, your ZyXEL Device filters out all incoming inquiries, thus preventing intruders from probing your network.

10.6.3 How NAT Works

Each packet has two addresses – a source address and a destination address. For outgoing packets, the inside local address is the source address on the LAN, and the inside public address is the source address on the WAN. For incoming packets, the inside local address is the destination address on the LAN, and the inside public address is the destination address on the WAN. NAT maps private (local) IP addresses to globally unique ones required for communication with hosts on other networks. It replaces the original IP source address (and TCP or UDP source port numbers for Many-to-One and Many-to-Many Overload NAT mapping) in each packet and then forwards it to the Internet. The ZyXEL Device keeps track of the original addresses and port numbers so incoming reply packets can have their original values restored. The following figure illustrates this.

 

89

P-660R-T1 v3 User’s Guide