|
| Chapter 11 Quality of Service (QoS) |
| Table 27 Advanced Setup > QoS | |
| LABEL | DESCRIPTION |
| Queue # | Specify a Low, Medium, High or Highest queue tag to matched traffic. Traffic |
|
| assigned to a higher queue gets through faster while traffic in lower queues is |
|
| dropped when there is network congestion. |
|
|
|
| ADD | Click this to add the rule. |
|
|
|
| DELETE | Click this to remove the rule. |
|
|
|
| CANCEL | Click this to restore previously saved settings. |
|
|
|
Use this screen to display a summary of rules and actions configured for the ZyXEL Device. In the Advanced > QoS screen, click the QoS Settings Summary button to open the following screen.
Figure 42 Advanced Setup > QoS > QoS Settings Summary
The following table describes the labels in this screen.
Table 28 Advanced Setup > QoS > QoS Settings Summary
LABEL | DESCRIPTION |
Rules |
|
|
|
# | This is the rule’s index number. |
|
|
Active | This shows whether the rule is enabled or disabled. |
|
|
Physical Ports | This is the physical port associated with the rule. |
|
|
Destination MAC | This is the port range for destination MAC address and IP address. |
and IP/Mask Port |
|
Ranges |
|
|
|
Source MAC and | This is the port range for source MAC address and IP address. |
IP/Mask Port |
|
Ranges |
|
|
|
Protocol ID | This is the protocol ID associated with the rule. |
|
|
VLAN ID | This is the VLAN ID associated with the rule. |
|
|
IPP/TOS (DSCP) | This shows the IPP/TOS or DSCP settings. |
|
|
802.1p | This is the 802.1p priority level. |
|
|
Actions |
|
|
|
| 95 |
|
|