9
Static Route
9.1 Overview
The ZyXEL Device usually uses the default gateway to route outbound traffic from computers on the LAN to the Internet. To have the ZyXEL Device send data to devices not reachable through the default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the ZyXEL Device’s LAN interface. The ZyXEL Device routes most traffic from A to the Internet through the ZyXEL Device’s default gateway (R1). You create one static route to connect to services offered by your ISP behind router R2.
Figure 31 Example of Static Routing Topology
R1
A
LANWAN
R2
9.1.1What You Can Do in the Static Route Screens
•Use the Routing Table List screen (Section 9.2 on page 78) to view static routes on the ZyXEL Device.
•Use the Static Route screen (Section 9.2.1 on page 78) to add or edit IP static routes on the ZyXEL Device.
| 77 |
|
|