Chapter 2 Wireless Tutorial

Figure 4 Network > Wireless LAN > General

2Make sure the Enable Wireless LAN check box is selected.

3Enter SSID_Example3 as the SSID and select a channel.

4Set security mode to WPA-PSK and enter ThisismyWPA-PSKpre-sharedkey in the Pre-Shared Key field. Click Apply.

5Open the Status screen.Verify your wireless and wireless security settings under Device Information and check if the WLAN connection is up under Interface Status.

Figure 5 Status: Wireless Settings Example

6Click the WLAN Station Status hyperlink in the AP’s Status screen. You can see if any wireless client has connected to the AP.

28

 

PLA-450 User’s Guide