Chapter 8 Logs
Table 26 Maintenance > Logs > Log Settings
LABEL | DESCRIPTION | |
User Name | Enter the user name (up to 31 characters) (usually the user name of a mail | |
| account). | |
|
| |
Password | Enter the password associated with the user name above. | |
|
| |
Log Schedule | This | |
| sent as | |
| • | Daily |
| • | Weekly |
| • | Hourly |
| • When Log is Full | |
| • | None. |
| If you select Weekly or Daily, specify a time of day when the | |
| sent. If you select Weekly, then also specify which day of the week the | |
| should be sent. If you select When Log is Full, an alert is sent when the log fills | |
| up. If you select None, no log messages are sent. | |
|
| |
Day for Sending Log | Use the drop down list box to select which day of the week to send the logs. | |
|
| |
Time for Sending | Enter the time of the day in | |
Log | to send the logs. | |
|
| |
Clear log after | Select the checkbox to delete all the logs after the ZyXEL Device sends an E- | |
sending mail | mail of the logs. | |
|
| |
Syslog Logging | The ZyXEL Device sends a log to an external syslog server. | |
|
| |
Active | Click Active to enable syslog logging. | |
|
| |
Syslog Server IP | Enter the server name or IP address of the syslog server that will log the | |
Address | selected categories of logs. | |
|
| |
Log Facility | Select a location from the drop down list box. The log facility allows you to log | |
| the messages to different files in the syslog server. Refer to the syslog server | |
| manual for more information. | |
|
|
|
Active Log and Alert |
|
|
|
| |
Log | Select the categories of logs that you want to record. | |
|
| |
Send Immediate | Select log categories for which you want the ZyXEL Device to send | |
Alert | alerts immediately. | |
|
| |
Apply | Click Apply to save your changes. | |
|
| |
Reset | Click Reset to begin configuring this screen afresh. | |
|
|
|
88 |
| |
| ||
|
|
|