Chapter 4 Wireless LAN
Figure 28 Network > Wireless LAN > General: Static WEP
The following table describes the wireless LAN security labels in this screen.
Table 12 Network > Wireless LAN > General: Static WEP
LABEL | DESCRIPTION |
Passphrase | Enter a passphrase (password phrase) of up to 32 printable characters and click |
| Generate. The ZyXEL Device automatically generates four different WEP keys and |
| displays them in the Key fields below. |
|
|
WEP | Select |
Encryption |
|
|
|
Authentication | This field is activated when you select |
Method | Encryption field. |
| Select Auto, Open System or Shared Key from the |
|
|
ASCII | Select this option in order to enter ASCII characters as WEP key. |
|
|
Hex | Select this option in order to enter hexadecimal characters as a WEP key. |
| The preceding "0x", that identifies a hexadecimal key, is entered automatically. |
|
|
Key 1 to Key 4 | The WEP keys are used to encrypt data. Both the ZyXEL Device and the wireless |
| stations must use the same WEP key for data transmission. |
| If you chose |
| characters |
| If you chose |
| characters |
| You must configure at least one key, only one key can be activated at any one time. |
| The default key is key 1. |
|
|
Apply | Click Apply to save your changes back to the ZyXEL Device. |
|
|
Reset | Click Reset to reload the previous configuration for this screen. |
|
|
56 |
| |
| ||
|
|
|