10
Configuration Mode
Click Maintenance > Config Mode to open the following screen. This screen allows you to hide or display the advanced screens of some features or the advanced features, such as MAC filter. Basic is selected by default and you cannot see the advanced screens or features. If you want to view and configure all screens including the advanced ones, select Advanced and click Apply.
Figure 54 Maintenance > Config Mode > General
The following table describes the labels in the screen.
Table 29 Maintenance > Config Mode > General
LABEL DESCRIPTION
Configuration Mode
Basic | Select Basic mode to enable or disable features and to monitor the status of your |
| device. |
|
|
Advanced | Select Advanced mode to set advanced settings. |
|
|
Apply | Click on this to set the mode. |
|
|
Reset | Click on this to reset your selection to the default (Advanced). |
|
|
The following table lists the screens that you can view and configure only when you select Advanced.
Table 30 Advanced Configuration Options
CATEGORY | LINK | TAB |
Network | Wireless LAN | MAC Filter |
|
|
|
|
| Advanced |
|
|
|
|
| QoS |
|
|
|
Maintenance | Logs | Log Settings |
|
|
|
| 95 |
|
|