Husqvarna 324RX manual Fuel Handling, Fueling

Page 19

FUEL HANDLING

When the oil level is low, top up using engine oil to the edge of the oil reﬁll hole.

Only use recommended engine oil.

Fueling

WARNING! Taking the following

!precautions, will lessen the risk of ﬁre:

Do not smoke or place hot objects near fuel.

Always shut off the engine before refuelling.

Always stop the engine and let it cool for a few minutes before refuelling.

When refuelling, open the fuel cap slowly so that any excess pressure is released gently.

Tighten the fuel cap carefully after refuelling.

Always move the machine away from the refuelling area before starting.

Clean around the fuel cap. Clean the fuel and oil tank regularly. The fuel ﬁlter should be changed at least once a year. Contamination in the tanks causes malfunction.

Always move the machine about 3 metres from the refuelling position before starting.

English – 19

Image 19

Contents Operator’s manual EPA 324RX-SeriesEnglish Symbols KEY TO SYMBOLSContents CONTENTSNote the following before starting Dear customer INTRODUCTIONWhat is what on the clearing saw? WHAT IS WHAT?Personal protective equipment GENERAL SAFETY PRECAUTIONSThrottle lockout Machine′s safety equipmentCutting attachment guard Stop switchVibration damping system Mufﬂer Quick releaseLocking nut Cutting equipmentCutting equipment WARNING! Always discard a blade that is Sharpening grass cutters and grass bladesSharpening the saw blade General rulesTrimmer head Fitting the handlebar ASSEMBLYTransport position, handlebar G F E D Assembling the cutting equipmentFitting a blade guard, grass blade and grass cutter Fitting the blade guard and saw bladeG F D B C Fitting a trimmer guard and Superauto II 1 trimmer headFitting other guards and cutting attachments Adjusting the harness and clearing sawStandard harness Correct balance Correct heightFuel handling FUEL HANDLINGFuel Fueling Check before starting STARTING AND STOPPINGStarting and stopping Starting WARNING! When the engine is started withWarm engine For throttle handles with a start throttle lockGeneral working instructions WORKING TECHNIQUESThe ABC of clearing Forestry clearing using a saw blade Trimming Grass clearing using a grass bladeBrush cutting with a saw blade Grass trimming with a trimmer headSweeping CuttingCarburetor MAINTENANCEMufﬂer Cleaning the air ﬁlter Cooling systemSpark plug Air ﬁlterBevel gear Oiling the air ﬁlterCheck that the bevel gear is ﬁlled three-quarters full with lubricant Maintenance scheduleTechnical data TECHNICAL DATAType Approved accessoriesCutting attachment guard, Art. no FEDERAL EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS4,0 m Super AutoSuper Auto II 2,4 mmPage 2,4-2,7 mm 8,5 m10 cm 4,2 m Clic2,4-2,7 mm 4,25 m10 cm 4,3 m T35, T35xPage ´z+R=¶5I¨ ´z+R=¶5I¨