Husqvarna 324RX manual Key To Symbols

Page 2

KEY TO SYMBOLS

KEY TO SYMBOLS

Symbols

WARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of the operator’s manual.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

•A protective helmet where there is a risk of falling objects

•Approved hearing protection

•Approved eye protection

Max. speed of output shaft, rpm

Only use non-metallic, ﬂexible cutting attachments, i.e. trimmer heads with trimmer cord.

Other symbols/decals on the machine refer to special certiﬁcation requirements for certain markets.

Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance.

Always wear approved protective gloves.

Regular cleaning is required.

Watch out for thrown objects and ricochets.

	The operator of the machine must
	ensure, while working, that no persons	15 m	15 m
	or animals come closer than 15 metres.	15 m	15 m
	or animals come closer than 15 metres.	50FT	50FT

Machines ﬁtted with saw blades or

grass blades can be thrown violently to

the side when the blade comes into contact with a ﬁxed object. This is called blade thrust. The blade is capable of amputating an arm or leg. Always keep

people and animals at least 15 metres from the machine.

Arrows which show limits for handle positioning.

Always wear approved protective gloves.

Wear sturdy, non-slip boots.

Visual check.

Approved eye protection must always be used.

2 – English

Image 2

Contents English 324RX-SeriesOperator’s manual EPA KEY TO SYMBOLS SymbolsNote the following before starting CONTENTSContents INTRODUCTION Dear customerWHAT IS WHAT? What is what on the clearing saw?GENERAL SAFETY PRECAUTIONS Personal protective equipmentMachine′s safety equipment Throttle lockoutVibration damping system Stop switchCutting attachment guard Quick release MufﬂerCutting equipment Cutting equipmentLocking nut General rules Sharpening grass cutters and grass bladesSharpening the saw blade WARNING! Always discard a blade that isTrimmer head Transport position, handlebar ASSEMBLYFitting the handlebar Fitting the blade guard and saw blade Assembling the cutting equipmentFitting a blade guard, grass blade and grass cutter G F E DFitting a trimmer guard and Superauto II 1 trimmer head G F D B CStandard harness Adjusting the harness and clearing sawFitting other guards and cutting attachments Correct height Correct balanceFuel FUEL HANDLINGFuel handling Fueling Starting and stopping STARTING AND STOPPINGCheck before starting For throttle handles with a start throttle lock WARNING! When the engine is started withWarm engine StartingWORKING TECHNIQUES General working instructionsThe ABC of clearing Forestry clearing using a saw blade Grass trimming with a trimmer head Grass clearing using a grass bladeBrush cutting with a saw blade TrimmingCutting SweepingMufﬂer MAINTENANCECarburetor Air ﬁlter Cooling systemSpark plug Cleaning the air ﬁlterOiling the air ﬁlter Bevel gearMaintenance schedule Check that the bevel gear is ﬁlled three-quarters full with lubricantTECHNICAL DATA Technical dataCutting attachment guard, Art. no Approved accessoriesType YOUR WARRANTY RIGHTS AND OBLIGATIONS FEDERAL EMISSION CONTROL WARRANTY STATEMENT2,4 mm Super AutoSuper Auto II 4,0 mPage Clic 8,5 m10 cm 4,2 m 2,4-2,7 mm4,25 m 2,4-2,7 mmT35, T35x 10 cm 4,3 mPage ´z+R=¶5I¨ ´z+R=¶5I¨