Husqvarna 324RX manual General Safety Precautions, Quick release, Muffler

Page 9
Quick release

GENERAL SAFETY PRECAUTIONS

Quick release

There is an easily accessible, quick release fitted at the front as a safety precaution in case the engine catches fire, or in any other situation that requires you to free yourself from the machine and harness. See instructions under the heading Adjusting the harness and clearing saw.

Check that the harness straps are correctly positioned. Once the harness and machine have been adjusted, check that the harness quick release works correctly.

Muffler

The muffler is designed to keep noise levels to a minimum and to direct exhaust fumes away from the user. A muffler fitted with a catalytic converter is also designed to reduce harmful exhaust gases.

In countries that have a warm and dry climate there is a significant risk of fire. We therefore fit certain mufflers with a spark arrestor screen. Check whether the muffler on your machine is fitted with this kind of screen.

For mufflers it is very important that you follow the instructions on checking, maintaining and servicing your machine.

Never use a machine that has a faulty muffler.

Regularly check that the muffler is securely attached to the machine.

If the muffler on your machine is fitted with a spark arrestor screen this must be cleaned regularly. A blocked screen will cause the engine to overheat and may lead to serious damage.

 

!

 

WARNING! Mufflers fitted with catalytic

 

 

converters get very hot during use and

 

 

remain so for some time after stopping.

 

 

 

 

 

 

This also applies at idle speed. Contact can

 

 

 

result in burns to the skin. Remember the

 

 

 

risk of fire!

 

 

 

 

 

 

 

 

 

!

 

WARNING! The inside of the muffler contain

 

 

chemicals that may be carcinogenic. Avoid

 

 

contact with these elements in the event of

 

 

 

 

 

 

a damaged muffler.

 

 

 

 

 

 

 

 

 

!

 

WARNING! Bear in mind that:

 

 

The exhaust fumes from the engine are hot

 

 

 

and may contain sparks which can start a

 

!

 

fire. Never start the machine indoors or

 

 

near combustible material!

 

 

 

 

 

 

 

English 9

Image 9
Contents 324RX-Series Operator’s manual EPAEnglish Symbols KEY TO SYMBOLSCONTENTS ContentsNote the following before starting Dear customer INTRODUCTIONWhat is what on the clearing saw? WHAT IS WHAT?Personal protective equipment GENERAL SAFETY PRECAUTIONSThrottle lockout Machine′s safety equipmentStop switch Cutting attachment guardVibration damping system Muffler Quick releaseCutting equipment Locking nutCutting equipment Sharpening the saw blade Sharpening grass cutters and grass bladesGeneral rules WARNING! Always discard a blade that isTrimmer head ASSEMBLY Fitting the handlebarTransport position, handlebar Fitting a blade guard, grass blade and grass cutter Assembling the cutting equipmentFitting the blade guard and saw blade G F E DG F D B C Fitting a trimmer guard and Superauto II 1 trimmer headAdjusting the harness and clearing saw Fitting other guards and cutting attachmentsStandard harness Correct balance Correct heightFUEL HANDLING Fuel handlingFuel Fueling STARTING AND STOPPING Check before startingStarting and stopping Warm engine WARNING! When the engine is started withFor throttle handles with a start throttle lock StartingGeneral working instructions WORKING TECHNIQUESThe ABC of clearing Forestry clearing using a saw blade Brush cutting with a saw blade Grass clearing using a grass bladeGrass trimming with a trimmer head TrimmingSweeping CuttingMAINTENANCE CarburetorMuffler Spark plug Cooling systemAir filter Cleaning the air filterBevel gear Oiling the air filterCheck that the bevel gear is filled three-quarters full with lubricant Maintenance scheduleTechnical data TECHNICAL DATAApproved accessories TypeCutting attachment guard, Art. no FEDERAL EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONSSuper Auto II Super Auto2,4 mm 4,0 mPage 10 cm 4,2 m 8,5 mClic 2,4-2,7 mm2,4-2,7 mm 4,25 m10 cm 4,3 m T35, T35xPage ´z+R=¶5I¨ ´z+R=¶5I¨