Husqvarna 324RX manual General Safety Precautions, Personal protective equipment

Page 6
GENERAL SAFETY PRECAUTIONS

GENERAL SAFETY PRECAUTIONS

Important

IMPORTANT!

The machine is only designed for trimming grass, grass clearing and/or forestry clearing.

The only accessories you can operate with this engine unit are the cutting attachments we recommend in the chapter on Technical data.

Never use the machine if you are tired, if you have drunk alcohol, or if you are taking medication that could affect your vision, your judgement or your co-ordination.

Wear personal protective equipment. See instructions under the heading Personal protective equipment.

Never use a machine that has been modified in any way from its original specification.

Never use a machine that is faulty. Carry out the checks, maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the heading Maintenance.

All covers, guards and handles must be fitted before starting. Ensure that the spark plug cap and ignition lead are undamaged to avoid the risk of electric shock.

The machine operator must ensure that no people or animals come closer than 15 metres while working. When several operators are working in the same area the safety distance should be at least twice the tree height and no less than 15 metres.

 

!

WARNING! The ignition system of this

 

machine produces an electromagnetic field

 

 

during operation. This field may under

 

 

some circumstances interfere with

 

 

pacemakers. To reduce the risk of serious

 

 

or fatal injury, we recommend persons with

 

 

pacemakers to consult their physician and

 

 

the pacemaker manufacturer before

 

 

operating this machine.

 

 

 

 

 

 

 

!

WARNING! Running an engine in a confined

 

or badly ventilated area can result in death

 

due to asphyxiation or carbon monoxide

 

 

 

 

poisoning.

 

 

 

Personal protective equipment

IMPORTANT!

A clearing saw, brushcutter or trimmer can be dangerous if used incorrectly or carelessly, and can cause serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of this operator’s manual.

You must use approved personal protective equipment whenever you use the machine. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Ask your dealer for help in choosing the right equipment.

WARNING! Listen out for warning signals

! or shouts when you are wearing hearing protection. Always remove your hearing protection as soon as the engine stops.

HELMET

A helmet should be worn if the trees being cleared are taller than 2 m.

HEARING PROTECTION

Wear hearing protection that provides adequate noise reduction.

EYE PROTECTION

Always wear approved eye protection. If you use a visor then you must also wear approved protective goggles. Approved protective goggles must comply with standard ANSI Z87.1 in the USA or EN 166 in EU countries.

GLOVES

Gloves should be worn when necessary, e.g., when fitting cutting attachments.

6 – English

Image 6
Contents 324RX-Series Operator’s manual EPAEnglish KEY TO SYMBOLS SymbolsCONTENTS ContentsNote the following before starting INTRODUCTION Dear customerWHAT IS WHAT? What is what on the clearing saw?GENERAL SAFETY PRECAUTIONS Personal protective equipmentMachine′s safety equipment Throttle lockoutStop switch Cutting attachment guardVibration damping system Quick release MufflerCutting equipment Locking nutCutting equipment General rules Sharpening grass cutters and grass bladesSharpening the saw blade WARNING! Always discard a blade that isTrimmer head ASSEMBLY Fitting the handlebarTransport position, handlebar Fitting the blade guard and saw blade Assembling the cutting equipmentFitting a blade guard, grass blade and grass cutter G F E DFitting a trimmer guard and Superauto II 1 trimmer head G F D B CAdjusting the harness and clearing saw Fitting other guards and cutting attachmentsStandard harness Correct height Correct balanceFUEL HANDLING Fuel handlingFuel Fueling STARTING AND STOPPING Check before startingStarting and stopping For throttle handles with a start throttle lock WARNING! When the engine is started withWarm engine StartingWORKING TECHNIQUES General working instructionsThe ABC of clearing Forestry clearing using a saw blade Grass trimming with a trimmer head Grass clearing using a grass bladeBrush cutting with a saw blade TrimmingCutting SweepingMAINTENANCE CarburetorMuffler Air filter Cooling systemSpark plug Cleaning the air filterOiling the air filter Bevel gearMaintenance schedule Check that the bevel gear is filled three-quarters full with lubricantTECHNICAL DATA Technical dataApproved accessories TypeCutting attachment guard, Art. no YOUR WARRANTY RIGHTS AND OBLIGATIONS FEDERAL EMISSION CONTROL WARRANTY STATEMENT2,4 mm Super AutoSuper Auto II 4,0 mPage Clic 8,5 m10 cm 4,2 m 2,4-2,7 mm4,25 m 2,4-2,7 mmT35, T35x 10 cm 4,3 mPage ´z+R=¶5I¨ ´z+R=¶5I¨