Unigreen Minibar, Ventagli, Super Spalliera, RV-GDC manual Key to the symbols

Page 5

1

2

3

4

5

6

Key to the symbols

1- Read the Use and Maintenance manual

 

 

 

 

 

 

 

 

 

 

 

 

2- Stop the machine and read the manual before

 

 

 

 

 

 

every intervention

 

 

 

 

 

 

3- Don’t lubricate while running

 

 

 

 

 

 

4- Don’t drink

 

 

 

 

 

 

5- Don’t dispose of residue liquids in the

 

 

 

 

 

 

environment

 

 

 

 

 

 

6- No smoking

7

8

9

10

11

12

7- Danger, risk or injury, don’t get near the

 

 

 

 

 

 

machine until the moving machine members

 

 

 

 

 

 

have stopped

 

 

 

 

 

 

8- Danger of crushing, don’t get your hands near

 

 

 

 

 

 

the moving mechanical machine members

 

 

 

 

 

 

9- Danger, risk or injury caused by fluids under

 

 

 

 

 

 

pressure

 

 

 

16

17

18

10- Don’t climb on the machine during work or

13

14

15

transfers

 

 

 

 

 

 

11- Don’t climb on the tank

 

 

 

 

 

 

12- Don’t enter in the tank

 

 

 

 

 

 

13- Wearing earmuffs is obligatory

 

 

 

 

 

 

14- Wearing a face mask is obligatory

 

 

 

 

 

 

15- Wearing safety footwear is obligatory

 

 

 

 

 

 

16- Wearing protective gloves is obligatory

 

 

 

 

 

 

17- Wearing protective overalls is obligatory

 

 

 

 

 

 

18- Use a working pressure under that indicated

 

 

 

 

 

 

in red on the manometer.

19

20

21

 

22

23

19- Don’t get your hands near the moving cardan

 

shaft

 

 

 

 

 

 

20- Make sure power-takeoff of the tractor turns in the right direction and runs at the right speed. 21- Don’t remove the protecting device with fan moving.

22- Material shooting off the machine, stand at a safe distance.

23- Don’t stand between the machine and the tractor.

2SAFETY REGULATIONS AND RESIDUAL RISKS In relation to safety, the following terms will be used:

Dangerous zones: any zone inside and/or near the machine where the presence of a person exposed constitutes a risk for the safety and health of the same person.

Person exposed: any person who has their body or any part of their body in a dangerous zone.

Before starting the machine, the operator must check for any visible faults in the safety devices and the machine itself.

Never start the machine until you have told anyone in the range of action of the machine to move away and they have done so.

The protective devices must not be removed or disabled when the machine is running.

It is obligatory to keep all the plates with danger and safety signs in perfect conditions. If they get damaged or deteriorate, replace them in good time. Replace parts believed to be faulty with others indicated by UNIGREEN. NEVER try makeshift or hazardous solutions.

Don’t wear clothes, jewellery, accessories, or anything else that can get caught in the moving machine members.

Pay the greatest attention to all the warning and danger signs on the machine. Don’t use the machine for any other purpose other than that indicated in the manual.

The machine has been designed and built with the appropriate devices to guarantee the safety of the user.

In any case there are some residual risks associated with the improper use of the machine by the operator; for this purpose danger signs and symbols and prohibitions are applied near some parts of the machine (see previous pictograms).

FIG.1

11+12

da 1 a 18

23

 

21+22

19+20

INDICATIVE POSITION OF THE WARNING SIGNS ON THE MISTBLOWERS

NB: the position may vary on the basis of the characteristics of the model.

unigreen 5

Image 5
Contents 09/2006 USE and Maintenance ManualSummary Hand Lances Maintenance Guarantee Using and Keeping the USE and Maintenance ManualComposition of the Manual Product Responsibility Unigreen spa is not responsible ifKey to the symbols Intended USE Using Chemical ProductsProhibited USE Regulations for the USE of Chemical ProductsWeather Conditions Characteristics and SpecificationsDriving on the Road Tables of Fittings AllowedStandards of Reference Noise Level of the MachineInstructions Description of the MachineTowed Atomisers Parking Preliminary ChecksTransporting and Moving the Machine THREE-POINT Coupling Tractor CouplingFor verification use the formula shown here Hydraulic Connection to the DistributorsSuction Filter Cardan ShaftPump Components of the Pressure Regulator Pressure RegulatorControl box for GCP Elettrico electrical regulators General InstructionsTank rinsing Ejector Agitator Delivery Filters only Equipped ModelsAuxiliaries Taps Block Filling the Tank Test with Clean WaterManual Premixing Mixing12.2PREMIXER on Cover Optional 12.4COVER Washer for Chemical Containers13.1CIRCUIT Washer and Tank Washer Washing the AtomiserClutch Blower GroupMultiplier FAN Unit Super Spalliera for Espalier Ventagli Fans CANOPY, and Espalier DistributorsMinibar for Espalier Hydraulics RV Boom for GDCOIL Feed from Tractor for hydraulic systems RV per GDCNON-DRIP Valve Spraying Description of the DiffusersDescription of the MFC Nozzles Mistblower CalibrationCalibrated Plates CP Batching Taps see PictureProgrammed Maintenance MaintenanceRoutine Maintenance Cleaning the NozzlesPutting Back Into Service After Winter Layup Extraordinary MaintenanceMultiplier Lubrication RepairsElectrical and Electronic Apparatus Waste Eeaw Demolition and DisposalMaterials for Demolition Tables for Calibrating Airdrop 2 Ventagli Fans Airdrop Calibrating TablesTables for Calibrating Airdrop 2 Ventagli + TOP Diffusors OptionalTables for Calibrating Airdrop Minibar Piastrina CalibrataTables for Calibrating Airdrop RV-GDC Tables for Calibrating Airdrop Super SpallieraTables of Delivery of Nozzles for Hand Lances 50 h 300 h Table of Programmed Maintenance OperationTAB a TAB.18A Allowed FittingsMember of the group