Unigreen Ventagli, Minibar, Super Spalliera manual Demolition and Disposal, Materials for Demolition

Page 24

8.7DEMOLITION AND DISPOSAL

When the sprayer will be put out of service you should wash it with great care to remove any residues of chemical product, follow the instructions in point 4.13 of the present handbook.

ATTENTION: It is necessary to adopt appropriate Individual Protection Devices in manipulating waste.

The disposal of waste deriving from the demolition of the machine must be carried out respecting the environment, avoiding soil, air and water pollution.

Local legislation in force in the matter must be respected in any case. Remember that waste is understood as any substance or object that enters into the categories shown in attachment A in part IV of Legisla- tive Decree 152/2006, that the holder has destroyed, has decided or is obliged to destroy.

Waste deriving from the demolition of the machine is classifiable as special waste.

8.7.1 MATERIALS FOR DEMOLITION

Non-dangerous special waste is that which can be recovered, according to the February 1998 Ministerial Decree:

·Iron, aluminium, stainless steel and copper materials

·Plastic materials

·Electronic cards

·Hydraulic oil

·Electrical plant

8.7.2INDICATIONS FOR A SUITABLE TREATMENT OF WASTE The Correct management of special waste envisages:

- stocking in suitable places, avoiding mixing dangerous waste with the non-dangerous.

- ensuring that authorised carriers and receivers carry out its transport and disposal/recovery.

Transport of one's waste to authorised collection centres is allowed exclusively if you are enrolled in the Environmental Management Register.

8.7.3ELECTRICAL AND ELECTRONIC APPARATUS WASTE (EEAW)

The Italian government has adopted the European Parliament directives in the matter of the disposal of electrical and electronic waste (EEAW) (2002/95/CE and 2003/108/CE Directives) with Legi- slative Decree n° 151,July 25 2005).

The measures: in particular, the decree established measures and procedures aimed at:

a) forestalling the production of EEAW;

b) promoting the re-use, recycling and other forms of EEAW recovery, in order to reduce the quantity to send for disposal;

c) improving, in terms of the environment, the actions of the subjects who participate in the life-cycle of these apparatuses (producers, distributors, consumers and operators directly involved in the treatment of EEAW);

d) reducing the use of dangerous substances in electrical and electronic apparatus.

The decree imposes the limitation and elimination of several substances present in EEAW: lead, mercury, cadmium, chrome, hexavalent chrome, polybrominated biphenyl, polybrominated diphenyl and polybrominated diphenyl ethers.

The machine has been designed and created in conformity with this directive. Follow the indications shown below.

The symbol to the side, showing a barred garbage can on wheels, indicates the separate collection of the electrical and electronic apparatuses of the machine.

The user of the present machine can contact the collection centres instituted by the Local Authorities or the UNIGREEN Company directly, or request withdrawal by the dealer, in order to carry out correct disposal of the waste.

24unigreen

Image 24
Contents USE and Maintenance Manual 09/2006Summary Hand Lances Maintenance Using and Keeping the USE and Maintenance Manual GuaranteeComposition of the Manual Product Responsibility Unigreen spa is not responsible ifKey to the symbols Using Chemical Products Intended USEProhibited USE Regulations for the USE of Chemical ProductsCharacteristics and Specifications Weather ConditionsDriving on the Road Tables of Fittings AllowedNoise Level of the Machine Standards of ReferenceInstructions Description of the MachinePreliminary Checks Transporting and Moving the MachineTowed Atomisers Parking Tractor Coupling THREE-POINT CouplingFor verification use the formula shown here Hydraulic Connection to the DistributorsCardan Shaft PumpSuction Filter Pressure Regulator Components of the Pressure RegulatorControl box for GCP Elettrico electrical regulators General InstructionsDelivery Filters only Equipped Models Auxiliaries Taps BlockTank rinsing Ejector Agitator Test with Clean Water Filling the TankMixing Manual Premixing12.2PREMIXER on Cover Optional 12.4COVER Washer for Chemical ContainersWashing the Atomiser 13.1CIRCUIT Washer and Tank WasherBlower Group Multiplier FAN UnitClutch Ventagli Fans CANOPY, and Espalier Distributors Minibar for EspalierSuper Spalliera for Espalier RV Boom for GDC HydraulicsOIL Feed from Tractor for hydraulic systems RV per GDCSpraying Description of the Diffusers NON-DRIP ValveDescription of the MFC Nozzles Mistblower CalibrationBatching Taps see Picture Calibrated Plates CPMaintenance Programmed MaintenanceRoutine Maintenance Cleaning the NozzlesExtraordinary Maintenance Putting Back Into Service After Winter LayupMultiplier Lubrication RepairsDemolition and Disposal Materials for DemolitionElectrical and Electronic Apparatus Waste Eeaw Airdrop Calibrating Tables Tables for Calibrating Airdrop 2 Ventagli FansOptional Tables for Calibrating Airdrop 2 Ventagli + TOP DiffusorsPiastrina Calibrata Tables for Calibrating Airdrop MinibarTables for Calibrating Airdrop Super Spalliera Tables for Calibrating Airdrop RV-GDCTables of Delivery of Nozzles for Hand Lances Table of Programmed Maintenance Operation 50 h 300 hTAB.18A Allowed Fittings TAB aMember of the group