BLOWER ASSEMBLY
ASSEMBLING BLOWER
WARNING: To Re - duce The Risk of Per- sonal Injury or Electric Shock – Disconnect from pow- er source before assembling or changing attachments.
Follow the steps below to assemble the blower.
1. Slide the blower tube competely onto outlet on front of blower housing with the curved end of the blower tube facing up. (See Figure 1)
2. Fasten with the two mounting screws. (See Figure 2)
Figure 1 - Sliding blower tube into place
Figure 2- Fasten with mounting screws.
www.remingtonpowertools.com | 6 |