RedMax BCZ3000SW manual If Someone Comes, Maintenance, Handling Fuel,  11 

Page 11

5. For safe operation

• IF SOMEONE COMES

1.Guard against hazardous situations at all times. Warn adults to keep pets and children away from the area. Be careful if you are approached. Injury may result from flying debris.

2.If someone calls out or otherwise interrupts you while working, always be sure to turn off the engine before turning around.

MAINTENANCE

1.In order to maintain your product in proper working order, perform the maintenance and checking operations described in the manual at regular intervals.

2.Always be sure to turn off the engine before performing any maintenance or checking procedures.

WARNING

The metallic parts reach high temperatures immediately after stopping the engine.

3.When replacing the cutting attachment or any other part, or when replacing the oil or any lubricant, always be sure to use only RedMax products or products which have been certified by RedMax for use with the RedMax product.

4.In the event that any part must be replaced or any maintenance or repair work not described in this manual must be performed, please contact a representative from the store nearest RedMax authorized servicing dealer for assistance.

5.Do not use any accessory or attachment other than those bearing the RedMax mark and recommended for the unit.

6.Under no circumstances should you ever take apart the product or alter it in any way. Doing so might result in the product becoming damaged during operation or the product becoming unable to operate properly.

HANDLING FUEL

1.The engine of the RedMax product is designed to run on a mixed fuel which contains highly flammable gasoline. Never store cans of fuel or

11

Image 11
Contents BCZ3000SW BCZ3000SWPage Contents Safety First 4  SpecificationsParts location  5   6  Symbols on the machine 7  For safe operationWorking Condition Working Circumstance 8  Working Plan 9  Before Starting the EngineStarting the Engine  10  Using the Product 11  MaintenanceIf Someone Comes Handling Fuel 12  Transportation 13  Putting on Waist PAD SE5Mounting Engine SE5 SE6 SE7 SE8 15  Installing Cutting Head SE10SE9 Balance UnitRecommended Mixing Ratio Gasoline 50OIL HOW to MIX FuelFuel  16 For Your Engine LIFE, Avoid Fueling the UnitOP4 Starting Engine OperationOP1 OP3 19   20  Adjusting the Line LengthOP7  21  MaintenanceMaintenance Chart MA1 Refilling Trimming Line MA1 22  Intake AIR Cooling Vent MA5 MA6 MufflerSpark Arrester Gear Case MA6 24  Procedures to be Performed After Every 100 Hours of USEStorage MA8 25  Optional blade usageOPT5 OPT2 OPT3 SET UP the BladeStandard OPT4 27  OPT6 OPT7 OPT8Cutting Method OperationControlling Blade Bounce OPT9 28   29  Maintenance BladeOPT10 Transporting the Unit 30  Troubleshooting guideCheck Probable Causes Action  31  Parts list 32  Drive Unit BCZ3000S S/N 300001 and up 33  Optional Blade & Accessories 34  Drive Unit BCZ3000SW S/N 300001 and up 35   36  Part Number Description Qty  37 Manufacturer’s warranty coverage Limited Warranty RedMax Garantie limitée