RedMax BCZ3000SW manual OPT2 OPT3 SET UP the Blade, Standard, OPT4, OPT5,  26 

Page 26

11. Optional blade usage

OPT2	(3)
	(3)
	(1)
	(2)

OPT3

(1)

■SET UP THE BLADE

1.Detach the line head assembly. (OPT2)

2.Put on the blade, making the marked side face the shaft side, put the holder and the cover on, and fasten the blade with the nut. (OPT2)

(1) Cover:	3540-13283
(2) Holder (B):	6019-13250	(STANDARD)
(3) Nut:	T3002-13260	(STANDARD)

IMPORTANT

[BCZ3000S/BCZ3000SW]

Change to the debris guard which is suitable for the metal blade. (OPT3)

OPT4

TIGHTENING TORQUE:

(1) Guard: T3246-24110

IMPORTANT

[BCZ3000S]

26~43.5 in-lbs (2.94~4.9 N.m.)

OPT5

26 

Change the loop handle to the J-handle for safe operation. (OPT4)

(1)Bracket: 3583-14101

(2)J-handle: 6367-14200

■BALANCE UNIT

1.Put on strap and attach unit to strap.

2.Slide clamp up or down until unit balances with head just touching on the ground. (OPT5)

■STARTING THE ENGINE

Please refer 5.For safe operation (P.9~10), 8.Operation (P.18).

WARNING

•The product is equipped with a centrifugal clutch mechanism, so the cutting attachment begins to rotate as soon as the engine is

Image 26

Contents BCZ3000SW BCZ3000SWPage Safety First Contents 4  SpecificationsParts location  5  Symbols on the machine  6 Working Circumstance For safe operationWorking Condition  7 Working Plan  8  9  Before Starting the EngineStarting the Engine Using the Product  10 Handling Fuel MaintenanceIf Someone Comes  11 Transportation  12  13  SE6 SE7 SE8 SE5Mounting Engine SE5 Putting on Waist PADBalance Unit Installing Cutting Head SE10SE9  15  16  HOW to MIX FuelFuel Recommended Mixing Ratio Gasoline 50OILFueling the Unit For Your Engine LIFE, AvoidOP3 OperationOP1 OP4 Starting Engine 19   20  Adjusting the Line LengthOP7 MA1 Refilling Trimming Line MA1 MaintenanceMaintenance Chart  21  22  Gear Case MA6 MA5 MA6 MufflerSpark Arrester Intake AIR Cooling VentMA8 Procedures to be Performed After Every 100 Hours of USEStorage  24 Optional blade usage  25 OPT4 OPT2 OPT3 SET UP the BladeStandard OPT5Operation OPT6 OPT7 OPT8Cutting Method  27 Controlling Blade Bounce OPT9 28  Transporting the Unit Maintenance BladeOPT10  29  30  Troubleshooting guideCheck Probable Causes Action Parts list  31 Drive Unit BCZ3000S S/N 300001 and up  32 Optional Blade & Accessories  33 Drive Unit BCZ3000SW S/N 300001 and up  34  35   36   37  Part Number Description QtyManufacturer’s warranty coverage Limited Warranty RedMax Garantie limitée