RedMax BCZ3000SW manual Safety First, Contents

Page 3

SAFETY FIRST

Instructions contained in warnings within this

manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such instructions carefully and follow them without fail.

WARNINGS IN THE MANUAL

WARNING

This mark indicates instructions which must be followed in order to prevent accidents which could lead to serious bodily injury or death.

IMPORTANT

This mark indicates instructions which must be followed, or it leads to mechanical failure, breakdown, or damage.

NOTE

This mark indicates hints or directions useful in the use of the product.

CONTENTS

1.Parts location …………………………………4

2.Specifications …………………………………4

3.Warning labels on the machine ……………5

4.Symbols on the machine ……………………6

5.For safe operation ……………………………7

6.Set up …………………………………………13

7.Fuel……………………………………………16

8.Operation ……………………………………18

9.Maintenance …………………………………21

10.Storage ………………………………………24

11.Optional blade usage ………………………25

12.Troubleshooting guide ………………………30

13.Parts list ………………………………………31

Image 3
Contents BCZ3000SW BCZ3000SWPage Contents Safety FirstSpecifications Parts location 4   5   6  Symbols on the machine 7  For safe operationWorking Condition Working Circumstance 8  Working PlanBefore Starting the Engine Starting the Engine 9   10  Using the Product 11  MaintenanceIf Someone Comes Handling Fuel 12  Transportation 13  Putting on Waist PAD SE5Mounting Engine SE5 SE6 SE7 SE8 15  Installing Cutting Head SE10SE9 Balance UnitRecommended Mixing Ratio Gasoline 50OIL HOW to MIX FuelFuel  16 For Your Engine LIFE, Avoid Fueling the UnitOP4 Starting Engine OperationOP1 OP3 19  Adjusting the Line Length OP7 20   21  MaintenanceMaintenance Chart MA1 Refilling Trimming Line MA1 22  Intake AIR Cooling Vent MA5 MA6 MufflerSpark Arrester Gear Case MA6 24  Procedures to be Performed After Every 100 Hours of USEStorage MA8 25  Optional blade usageOPT5 OPT2 OPT3 SET UP the BladeStandard OPT4 27  OPT6 OPT7 OPT8Cutting Method OperationOPT9  28 Controlling Blade Bounce  29  Maintenance BladeOPT10 Transporting the UnitTroubleshooting guide Check Probable Causes Action 30   31  Parts list 32  Drive Unit BCZ3000S S/N 300001 and up 33  Optional Blade & Accessories 34  Drive Unit BCZ3000SW S/N 300001 and up 35   36  Part Number Description Qty  37 Manufacturer’s warranty coverage Limited Warranty RedMax Garantie limitée