Simplicity Cobalt Series manual Inspection and Maintenance of the Roll Bar Seat Belt

Page 12

Safety

Controls

Operation

Specifications Troubleshooting Maintenance

Operator Safety

Inspection and Maintenance of the Roll Bar Seat Belt

WARNING

Failure to properly inspect and maintain the seat belt can cause serious injury or death.

•The seat belt like the ROLL BAR, needs to be periodically inspected to verify that the integrity has not been compromised through normal machine use, misuse, age degradation, modifications, or a roll over. If the seat belt does not pass all of the following tests, it should be replaced.

•Before Each Use – Conduct the following inspections/ maintenance of the seat belt and retraction mechanism:

1)Check for dirt or debris in the retraction mechanism. If dirt or debris is found, it should be removed.

2)Check to make sure the retraction mechanism retracts easily and completely.

3)Check for damage to any part of the seat belt such as nicks, cuts, loose stitching, or fraying.

4)Check that the buckle and latch operate properly and that the latch plate is not excessively worn, deformed, or the buckle is damaged or cracked. The seat belt should latch and release easily.

INSPECT BUCKLE

& LATCH

INSPECT WEBBING

10

www.simplicitymfg.com

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 30HP Zero-Turn Riders Mfg. No Description 5900763Date Purchased Table of Contents Operator Safety Operating SafetyRead the Manual ChildrenSlope Operation Thrown ObjectsMoving Parts Roll Bar Use Retaining Walls, Drop-offs, and WaterOverhead Obstacles Fuel and Maintenance Enclosed AreasSafety Controls Operation Troubleshooting MaintenanceSpecifications General OperationTowed Equipment Ride-On Units EmissionsIgnition System Operating on steep slopes can be dangerousService and Maintenance Service & MaintenanceSafe Handling of Gasoline Roll Bar Instructions Operational WarningsInspection of the Roll Bar Protective Structure Inspection and Maintenance of the Roll Bar Seat Belt Safety Controls Operation Safety DecalsSafety Interlock System Operational Safety ChecksSafety Icons North American Safety IconsFeatures and Controls Identification NumbersCE Models CE Identification Tag MarkingsSafety Controls Operation Maintenance TroubleshootingPTO Power Take Off Switch Parking BrakeIgnition Switch Hour Meter / Maintenance ReminderSeat Adjustment Lever Throttle ControlGeneral Operating Safety OperationChecks Before Starting Seat Adjustment Check Tire PressuresPushing the Rider by Hand Tire PressureMowing Height Adjustment Foot Pedal AdjustmentTo Adjust Pedal Position Insert the key into the ignition switch and turn it to Starting the EngineStopping the Rider Zero-Turn Driving Practice Forward Travel PracticeSmooth Travel Reverse Travel PracticePractice Turning Around a Corner Practice Turning In PlaceExecuting an End-Of-Row Zero Turn TurningSpecifications Troubleshooting Raise and Lower the Roll BarTo Lower the Roll Bar To Raise the Roll BarMowing Mowing RecommendationsHeight of Grass Tall Grass Requires Incremental CuttingMowing Methods Attaching a Trailer Proper MulchingMulching Requires Excellent Mowing Conditions How Much Grass to MulchRegular Maintenance Maintenance ScheduleCheck Rider / Mower for loose hardware Checking / Adding Fuel Fuel FilterChange Oil & Filter Remove the shop cloth and wipe up any spilled oilChange Hydraulic Oil Filter Check Hydraulic Oil LevelChange Interval Every 250 Hours Filter Part Number Lubrication GreaseOil Lubricating the Front CastersSafety Controls Operation Troubleshooting Maintenance Servicing The Mower BladesInspecting the Mower Blades Never weld or straighten bent mower bladesReinstalling the Mower Blades SpecificationsBattery Charging Battery MaintenanceCleaning the Battery and Cables Keep open flames and sparks away from the batteryGround Speed Control Lever Adjustment Speed Balancing AdjustmentNeutral Adjustment Return-to-Neutral AdjustmentChecking the Adjustment AdjustmentParking Brake Adjustment Hydraulic Pump Drive Belt ReplacementSuspension Adjustment To adjust the spring pre-loadSpring loaded components can kick back causing injury To adjust the upper mounting position Rear ShocksDeck Lift Rod Timing Adjustment Regular Maintenance Deck Lift SpringMower Belt Replacement To avoid damaging belts, do not pry belts over pulleysTroubleshooting Safety ControlsOperation Specifications Troubleshooting Maintenance Troubleshooting the RiderTroubleshooting the Rider Troubleshooting the MowerOperation Maintenance Troubleshooting Common Cutting ProblemsSpecifications Technical ManualsControls Operation HP Briggs & StrattonOperation Controls Safety This page Intentionally Blank Product Quick Specs Belts and Blades

Cobalt Series specifications

The Simplicity Cobalt Series is an innovative line of gardening equipment that blends performance, durability, and ease of use. Designed for both amateur gardeners and seasoned professionals, the Cobalt Series reflects a commitment to cutting-edge technology and thoughtful design, making garden maintenance enjoyable and efficient.

One of the standout features of the Cobalt Series is its lightweight yet robust construction. Utilizing advanced materials, these tools minimize user fatigue, allowing for prolonged usage without discomfort. The ergonomic design of the handles ensures a comfortable grip, promoting natural hand movements which reduces strain during gardening tasks.

The Cobalt Series integrates smart technology into its product lineup. Many of the tools are equipped with a unique power management system, optimizing battery life and enhancing efficiency. This means users can accomplish more with less time spent recharging. Additionally, select models feature wireless connectivity, allowing gardeners to track their usage, receive maintenance reminders, and access instructional content through a dedicated app.

A key characteristic of the Cobalt Series is versatility. The range includes a variety of tools such as electric trimmers, mowers, and blowers, all designed to tackle different gardening tasks with ease. Each tool is engineered for optimal performance, boasting powerful motors that ensure effective cutting and cleaning. Whether it’s mowing a lawn, trimming hedges, or blowing leaves, users can trust the Cobalt Series to deliver professional results.

Moreover, the Cobalt Series prioritizes safety, incorporating features like automatic shut-off and safety guards. These enhancements not only protect the user but also ensure that the equipment remains in top condition during operation.

In terms of maintenance, the Cobalt Series tools are designed to be hassle-free. Many models include self-cleaning mechanisms and robust components that require minimal upkeep. This focus on reliability means that gardeners can spend more time enjoying their outdoor spaces and less time on repairs.

Finally, with a sleek and modern aesthetic, the Simplicity Cobalt Series not only performs well but also looks great in any garden shed or workspace. Overall, the Cobalt Series is a testament to Simplicity’s dedication to combining innovation with practical gardening solutions. Whether you are rejuvenating your garden or maintaining a landscape, the tools from the Cobalt Series are sure to enhance your gardening experience.
Top Page Image Contents