Simplicity Cobalt Series manual Check Tire Pressures, Seat Adjustment, Pushing the Rider by Hand

Page 19

Check Tire Pressures

Tire pressure should be checked periodically, and maintained at the levels shown in the chart. Note that these pressures may differ slightly from the “Max Inflation” stamped on the side-wall of the tires. The pressures shown provide proper traction, improve cut quality, and extend tire life.

Tire

Pressure

Front

25 psi (1,72 bar)

Rear

15 psi (1,03 bar)

 

 

Seat Adjustment

See Figure 3. The seat can be adjusted forward and back. Move the lever (A, Figure 3) forward, position the seat as desired, and release the lever to lock the seat into position.

 

Operation

 

Safety

Figure 2. Checking Tire Pressure

Controls

A

 

Operation

Pushing the Rider by Hand

NOTICE

•Towing the unit will cause hydraulic pump and wheel motor damage.

•Do NOT tow rider.

•Do NOT use another vehicle to push or pull this unit.

1.Disengage the PTO, engage the parking brake, turn the ignition OFF, and remove the key.

2.Lift the seat plate to gain access to the hydraulic pumps.

3.To disengage the pumps (free-wheel position), turn the hydraulic release valves (A, Figure 4) located on the pumps counter-clockwisea maximum of 2 full turns.

4.Disengage the parking brake.

The tractor can now be pushed by hand.

5.After moving the tractor, re-engage the pumps (drive position) by turning the release valves clockwise and tighten to 80-120 in. lbs. (9.04 - 13.56 Nm) of torque.

Figure 3. Seat Adjustment

A. Seat Adjustment Lever

 

A

Maintenance

 

 

Figure 4. Hydraulic System By-Pass

Troubleshooting

A.

Hydraulic Release Valve

 

(left-hand pump shown)

 

 

Specifications

17

Page 18 Page 20
Image 19
Page 18 Page 20
Contents 5900763 30HP Zero-Turn Riders Mfg. No DescriptionDate Purchased Table of Contents Children Operator SafetyOperating Safety Read the ManualThrown Objects Slope OperationMoving Parts Retaining Walls, Drop-offs, and Water Roll Bar UseOverhead Obstacles Enclosed Areas Fuel and MaintenanceGeneral Operation SafetyControls Operation Troubleshooting Maintenance SpecificationsOperating on steep slopes can be dangerous Towed Equipment Ride-On UnitsEmissions Ignition SystemService & Maintenance Service and MaintenanceSafe Handling of Gasoline Operational Warnings Roll Bar InstructionsInspection of the Roll Bar Protective Structure Inspection and Maintenance of the Roll Bar Seat Belt Safety Decals Safety Controls OperationNorth American Safety Icons Safety Interlock SystemOperational Safety Checks Safety IconsCE Identification Tag Markings Features and ControlsIdentification Numbers CE ModelsParking Brake Safety Controls Operation MaintenanceTroubleshooting PTO Power Take Off SwitchThrottle Control Ignition SwitchHour Meter / Maintenance Reminder Seat Adjustment LeverOperation General Operating SafetyChecks Before Starting Tire Pressure Seat AdjustmentCheck Tire Pressures Pushing the Rider by HandFoot Pedal Adjustment Mowing Height AdjustmentTo Adjust Pedal Position Starting the Engine Insert the key into the ignition switch and turn it toStopping the Rider Reverse Travel Practice Zero-Turn Driving PracticeForward Travel Practice Smooth TravelTurning Practice Turning Around a CornerPractice Turning In Place Executing an End-Of-Row Zero TurnTo Raise the Roll Bar Specifications TroubleshootingRaise and Lower the Roll Bar To Lower the Roll BarTall Grass Requires Incremental Cutting MowingMowing Recommendations Height of GrassMowing Methods How Much Grass to Mulch Attaching a TrailerProper Mulching Mulching Requires Excellent Mowing ConditionsMaintenance Schedule Regular MaintenanceCheck Rider / Mower for loose hardware Remove the shop cloth and wipe up any spilled oil Checking / Adding FuelFuel Filter Change Oil & FilterCheck Hydraulic Oil Level Change Hydraulic Oil FilterChange Interval Every 250 Hours Filter Part Number Lubricating the Front Casters LubricationGrease OilNever weld or straighten bent mower blades Safety Controls Operation Troubleshooting MaintenanceServicing The Mower Blades Inspecting the Mower BladesSpecifications Reinstalling the Mower BladesKeep open flames and sparks away from the battery Battery ChargingBattery Maintenance Cleaning the Battery and CablesSpeed Balancing Adjustment Ground Speed Control Lever AdjustmentAdjustment Neutral AdjustmentReturn-to-Neutral Adjustment Checking the AdjustmentHydraulic Pump Drive Belt Replacement Parking Brake AdjustmentTo adjust the upper mounting position Rear Shocks Suspension AdjustmentTo adjust the spring pre-load Spring loaded components can kick back causing injuryDeck Lift Rod Timing Adjustment Deck Lift Spring Regular MaintenanceTo avoid damaging belts, do not pry belts over pulleys Mower Belt ReplacementTroubleshooting the Rider TroubleshootingSafety Controls Operation Specifications Troubleshooting MaintenanceTroubleshooting the Mower Troubleshooting the RiderTroubleshooting Common Cutting Problems Operation MaintenanceHP Briggs & Stratton SpecificationsTechnical Manuals Controls OperationOperation Controls Safety This page Intentionally Blank Belts and Blades Product Quick Specs

Cobalt Series specifications

The Simplicity Cobalt Series is an innovative line of gardening equipment that blends performance, durability, and ease of use. Designed for both amateur gardeners and seasoned professionals, the Cobalt Series reflects a commitment to cutting-edge technology and thoughtful design, making garden maintenance enjoyable and efficient.

One of the standout features of the Cobalt Series is its lightweight yet robust construction. Utilizing advanced materials, these tools minimize user fatigue, allowing for prolonged usage without discomfort. The ergonomic design of the handles ensures a comfortable grip, promoting natural hand movements which reduces strain during gardening tasks.

The Cobalt Series integrates smart technology into its product lineup. Many of the tools are equipped with a unique power management system, optimizing battery life and enhancing efficiency. This means users can accomplish more with less time spent recharging. Additionally, select models feature wireless connectivity, allowing gardeners to track their usage, receive maintenance reminders, and access instructional content through a dedicated app.

A key characteristic of the Cobalt Series is versatility. The range includes a variety of tools such as electric trimmers, mowers, and blowers, all designed to tackle different gardening tasks with ease. Each tool is engineered for optimal performance, boasting powerful motors that ensure effective cutting and cleaning. Whether it’s mowing a lawn, trimming hedges, or blowing leaves, users can trust the Cobalt Series to deliver professional results.

Moreover, the Cobalt Series prioritizes safety, incorporating features like automatic shut-off and safety guards. These enhancements not only protect the user but also ensure that the equipment remains in top condition during operation.

In terms of maintenance, the Cobalt Series tools are designed to be hassle-free. Many models include self-cleaning mechanisms and robust components that require minimal upkeep. This focus on reliability means that gardeners can spend more time enjoying their outdoor spaces and less time on repairs.

Finally, with a sleek and modern aesthetic, the Simplicity Cobalt Series not only performs well but also looks great in any garden shed or workspace. Overall, the Cobalt Series is a testament to Simplicity’s dedication to combining innovation with practical gardening solutions. Whether you are rejuvenating your garden or maintaining a landscape, the tools from the Cobalt Series are sure to enhance your gardening experience.
Top Page Image Contents