Simplicity Cobalt Series manual Practice Turning Around a Corner, Practice Turning In Place

Page 23

Practice Turning Around a Corner

While traveling forward allow one handle to gradually return back toward neutral. Repeat several times.

NOTE: To prevent pivoting directly on the tire tread, it is best to keep both wheels going at least slightly forward.

Executing

Turns

Figure 10. Turning Around a Corner

Operation

Practice Turning In Place

To turn in place, “Zero Turn,” gradually move one ground speed control lever forward from neutral and one lever back from neutral simultaneously. Repeat several times.

NOTE: Changing the amount each lever is pulled—forward or back, changes the “pivot point” you turn on.

Turning

In-Place

Figure 11. Turning in Place

Safety

Controls

Operation

Advanced Driving

Executing an End-Of-Row Zero Turn

Your Zero Turn Rider’s unique ability to turn in place allows you to turn around at the end of a cutting row rather than having to stop and Y-turn before starting a new row.

For example, to execute a left end-of row zero turn:

1.Slow down at the end of the row.

2.Move the RIGHT ground speed control lever forward slightly while moving the LEFT ground speed control lever back to center and then slightly back from center.

3.Begin mowing forward again.

This technique turns the rider LEFT and slightly overlaps the row just cut—eliminating the need to back up and re-cut missed grass.

As you become more familiar and experienced with operating the Zero Turn rider, you will learn more maneuvers that will make your mowing time easier and more enjoyable.

Remember, the more you practice, the better your control of the Zero Turn will be!

Maintenance

Troubleshooting

Specifications

Figure 12. Executing an End-Of-Row Turn

21

Page 22 Page 24
Image 23
Page 22 Page 24
Contents 5900763 30HP Zero-Turn Riders Mfg. No DescriptionDate Purchased Table of Contents Children Operator SafetyOperating Safety Read the ManualMoving Parts Slope OperationThrown Objects Overhead Obstacles Roll Bar UseRetaining Walls, Drop-offs, and Water Enclosed Areas Fuel and MaintenanceGeneral Operation SafetyControls Operation Troubleshooting Maintenance SpecificationsOperating on steep slopes can be dangerous Towed Equipment Ride-On UnitsEmissions Ignition SystemSafe Handling of Gasoline Service and MaintenanceService & Maintenance Inspection of the Roll Bar Protective Structure Roll Bar InstructionsOperational Warnings Inspection and Maintenance of the Roll Bar Seat Belt Safety Decals Safety Controls OperationNorth American Safety Icons Safety Interlock SystemOperational Safety Checks Safety IconsCE Identification Tag Markings Features and ControlsIdentification Numbers CE ModelsParking Brake Safety Controls Operation MaintenanceTroubleshooting PTO Power Take Off SwitchThrottle Control Ignition SwitchHour Meter / Maintenance Reminder Seat Adjustment LeverChecks Before Starting General Operating SafetyOperation Tire Pressure Seat AdjustmentCheck Tire Pressures Pushing the Rider by HandTo Adjust Pedal Position Mowing Height AdjustmentFoot Pedal Adjustment Stopping the Rider Insert the key into the ignition switch and turn it toStarting the Engine Reverse Travel Practice Zero-Turn Driving PracticeForward Travel Practice Smooth TravelTurning Practice Turning Around a CornerPractice Turning In Place Executing an End-Of-Row Zero TurnTo Raise the Roll Bar Specifications TroubleshootingRaise and Lower the Roll Bar To Lower the Roll BarTall Grass Requires Incremental Cutting MowingMowing Recommendations Height of GrassMowing Methods How Much Grass to Mulch Attaching a TrailerProper Mulching Mulching Requires Excellent Mowing ConditionsCheck Rider / Mower for loose hardware Regular MaintenanceMaintenance Schedule Remove the shop cloth and wipe up any spilled oil Checking / Adding FuelFuel Filter Change Oil & FilterChange Interval Every 250 Hours Filter Part Number Change Hydraulic Oil FilterCheck Hydraulic Oil Level Lubricating the Front Casters LubricationGrease OilNever weld or straighten bent mower blades Safety Controls Operation Troubleshooting MaintenanceServicing The Mower Blades Inspecting the Mower BladesSpecifications Reinstalling the Mower BladesKeep open flames and sparks away from the battery Battery ChargingBattery Maintenance Cleaning the Battery and CablesSpeed Balancing Adjustment Ground Speed Control Lever AdjustmentAdjustment Neutral AdjustmentReturn-to-Neutral Adjustment Checking the AdjustmentHydraulic Pump Drive Belt Replacement Parking Brake AdjustmentTo adjust the upper mounting position Rear Shocks Suspension AdjustmentTo adjust the spring pre-load Spring loaded components can kick back causing injuryDeck Lift Rod Timing Adjustment Deck Lift Spring Regular MaintenanceTo avoid damaging belts, do not pry belts over pulleys Mower Belt ReplacementTroubleshooting the Rider TroubleshootingSafety Controls Operation Specifications Troubleshooting MaintenanceTroubleshooting the Mower Troubleshooting the RiderTroubleshooting Common Cutting Problems Operation MaintenanceHP Briggs & Stratton SpecificationsTechnical Manuals Controls OperationOperation Controls Safety This page Intentionally Blank Belts and Blades Product Quick Specs

Cobalt Series specifications

The Simplicity Cobalt Series is an innovative line of gardening equipment that blends performance, durability, and ease of use. Designed for both amateur gardeners and seasoned professionals, the Cobalt Series reflects a commitment to cutting-edge technology and thoughtful design, making garden maintenance enjoyable and efficient.

One of the standout features of the Cobalt Series is its lightweight yet robust construction. Utilizing advanced materials, these tools minimize user fatigue, allowing for prolonged usage without discomfort. The ergonomic design of the handles ensures a comfortable grip, promoting natural hand movements which reduces strain during gardening tasks.

The Cobalt Series integrates smart technology into its product lineup. Many of the tools are equipped with a unique power management system, optimizing battery life and enhancing efficiency. This means users can accomplish more with less time spent recharging. Additionally, select models feature wireless connectivity, allowing gardeners to track their usage, receive maintenance reminders, and access instructional content through a dedicated app.

A key characteristic of the Cobalt Series is versatility. The range includes a variety of tools such as electric trimmers, mowers, and blowers, all designed to tackle different gardening tasks with ease. Each tool is engineered for optimal performance, boasting powerful motors that ensure effective cutting and cleaning. Whether it’s mowing a lawn, trimming hedges, or blowing leaves, users can trust the Cobalt Series to deliver professional results.

Moreover, the Cobalt Series prioritizes safety, incorporating features like automatic shut-off and safety guards. These enhancements not only protect the user but also ensure that the equipment remains in top condition during operation.

In terms of maintenance, the Cobalt Series tools are designed to be hassle-free. Many models include self-cleaning mechanisms and robust components that require minimal upkeep. This focus on reliability means that gardeners can spend more time enjoying their outdoor spaces and less time on repairs.

Finally, with a sleek and modern aesthetic, the Simplicity Cobalt Series not only performs well but also looks great in any garden shed or workspace. Overall, the Cobalt Series is a testament to Simplicity’s dedication to combining innovation with practical gardening solutions. Whether you are rejuvenating your garden or maintaining a landscape, the tools from the Cobalt Series are sure to enhance your gardening experience.
Top Page Image Contents