Simplicity Cobalt Series manual Towed Equipment Ride-On Units, Emissions, Ignition System

Page 9

Slope Operation

Slopes are a major factor related to loss-of-control and tip- over accidents, which can result in severe injury or death. Operation on all slopes requires extra caution. If you cannot back up the slope or if you feel uneasy on it, do not operate on it.

Control of a walk-behind or ride-on machine sliding on a slope will not be regained by the application of the brake. The main reasons for loss of control are: insufficient tire grip on the ground, speed too fast, inadequate braking, the type of machine is unsuitable for its task, lack of awareness of the ground conditions, incorrect hitching and load distribution.

1.Mow across slopes, not up and down.

2.Watch for holes, ruts, or bumps. Uneven terrain could overturn the unit. Tall grass can hide obstacles.

3.Choose a slow speed so that you will not have to stop or change speeds while on the slope.

4.Do not mow on wet grass. Tires may loose traction.

5.Avoid starting, stopping, or turning on a slope. If tires lose traction (i.e. machine stops forward motion on a slope), disengage the blade(s) (PTO) and drive slow off the slope.

6.Keep all movement on slopes slow and gradual. Do not make sudden changes in speed or direction, which could cause the machine to rollover.

7.Use extra care while operating machines with grass catchers or other attachments; they can affect the stability of the unit. Do not use on steeps slopes.

8.Do not try to stabilize the machine by putting your foot on the ground (ride-on units).

9.Do not mow near drop-offs, ditches, or embankments. The mower could suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.

10. Do not use grass catchers on steep slopes.

11. Do not mow slopes if you cannot back up them.

12. See your authorized dealer/retailer for recommendations of wheel weights or counterweights to improve stability.

13. Remove obstacles such as rocks, tree limbs, etc.

14. Use slow speed. Tires may lose traction on slopes even though the brakes are functioning properly.

15. Do not turn on slopes unless necessary, and then, turn slowly and gradually uphill, if possible. Never mow down slopes.

WARNING

Operating on steep slopes can be dangerous.

•Never operate on slopes greater than 15°.

•Select slow ground speed before driving onto a slope. Use extra caution when operating on slopes with a rear- mounted grass catcher.

•Mow across the face of slopes, not up and down, use caution when changing directions and DO NOT START OR STOP ON A SLOPE.

Operator Safety

Towed Equipment (Ride-On Units)

1.Tow only with a machine that has a hitch designed for towing. Do not attach towed equipment except at the hitch point.

2.Follow the manufacturer’s recommendations for weight limit for towed equipment and towing on slopes. See attaching a trailer under OPERATION.

3.Never allow children or others in or on towed equipment.

4.On slopes, the weight of the towed equipment may cause loss of traction and loss of control.

5.Travel slowly and allow extra distance to stop.

6.Do not shift to neutral and coast down hill.

Children

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the unit and the mowing activity. Never assume that children will remain where you last saw them.

1.Keep children out of the mowing area and under the watchful care of another responsible adult.

2.Be alert and turn unit off if children enter the area.

3.Before and during reverse operation, look behind and down for small children.

4.Never carry children, even with the blade(s) off. They may fall off and be seriously injured or interfere with safe unit operation. Children who have been given rides in the past may suddenly appear in the mowing area for another ride and be run over or backed over by the machine.

5.Never allow children to operate the unit.

6.Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

Emissions

1.Engine exhaust from this product contains chemicals known, in certain quantities, to cause cancer, birth defects, or other reproductive harm.

2.Look for the relevant Emissions Durability Period and Air Index information on the engine emissions label.

Ignition System

1.This spark ignition system complies with Canadian ICES-002.

Safety

Controls

Operation

Maintenance Troubleshooting Specifications

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 5900763 30HP Zero-Turn Riders Mfg. No DescriptionDate Purchased Table of Contents Operating Safety Operator SafetyRead the Manual ChildrenSlope Operation Thrown ObjectsMoving Parts Roll Bar Use Retaining Walls, Drop-offs, and WaterOverhead Obstacles Enclosed Areas Fuel and MaintenanceControls Operation Troubleshooting Maintenance SafetySpecifications General OperationEmissions Towed Equipment Ride-On UnitsIgnition System Operating on steep slopes can be dangerousService and Maintenance Service & MaintenanceSafe Handling of Gasoline Roll Bar Instructions Operational WarningsInspection of the Roll Bar Protective Structure Inspection and Maintenance of the Roll Bar Seat Belt Safety Decals Safety Controls OperationOperational Safety Checks Safety Interlock SystemSafety Icons North American Safety IconsIdentification Numbers Features and ControlsCE Models CE Identification Tag MarkingsTroubleshooting Safety Controls Operation MaintenancePTO Power Take Off Switch Parking BrakeHour Meter / Maintenance Reminder Ignition SwitchSeat Adjustment Lever Throttle ControlGeneral Operating Safety OperationChecks Before Starting Check Tire Pressures Seat AdjustmentPushing the Rider by Hand Tire PressureMowing Height Adjustment Foot Pedal AdjustmentTo Adjust Pedal Position Insert the key into the ignition switch and turn it to Starting the EngineStopping the Rider Forward Travel Practice Zero-Turn Driving PracticeSmooth Travel Reverse Travel PracticePractice Turning In Place Practice Turning Around a CornerExecuting an End-Of-Row Zero Turn TurningRaise and Lower the Roll Bar Specifications TroubleshootingTo Lower the Roll Bar To Raise the Roll BarMowing Recommendations MowingHeight of Grass Tall Grass Requires Incremental CuttingMowing Methods Proper Mulching Attaching a TrailerMulching Requires Excellent Mowing Conditions How Much Grass to MulchRegular Maintenance Maintenance ScheduleCheck Rider / Mower for loose hardware Fuel Filter Checking / Adding FuelChange Oil & Filter Remove the shop cloth and wipe up any spilled oilChange Hydraulic Oil Filter Check Hydraulic Oil LevelChange Interval Every 250 Hours Filter Part Number Grease LubricationOil Lubricating the Front CastersServicing The Mower Blades Safety Controls Operation Troubleshooting MaintenanceInspecting the Mower Blades Never weld or straighten bent mower bladesSpecifications Reinstalling the Mower BladesBattery Maintenance Battery ChargingCleaning the Battery and Cables Keep open flames and sparks away from the batterySpeed Balancing Adjustment Ground Speed Control Lever AdjustmentReturn-to-Neutral Adjustment Neutral AdjustmentChecking the Adjustment AdjustmentHydraulic Pump Drive Belt Replacement Parking Brake AdjustmentTo adjust the spring pre-load Suspension AdjustmentSpring loaded components can kick back causing injury To adjust the upper mounting position Rear ShocksDeck Lift Rod Timing Adjustment Deck Lift Spring Regular MaintenanceTo avoid damaging belts, do not pry belts over pulleys Mower Belt ReplacementSafety Controls TroubleshootingOperation Specifications Troubleshooting Maintenance Troubleshooting the RiderTroubleshooting the Mower Troubleshooting the RiderTroubleshooting Common Cutting Problems Operation MaintenanceTechnical Manuals SpecificationsControls Operation HP Briggs & StrattonOperation Controls Safety This page Intentionally Blank Belts and Blades Product Quick Specs

Cobalt Series specifications

The Simplicity Cobalt Series is an innovative line of gardening equipment that blends performance, durability, and ease of use. Designed for both amateur gardeners and seasoned professionals, the Cobalt Series reflects a commitment to cutting-edge technology and thoughtful design, making garden maintenance enjoyable and efficient.

One of the standout features of the Cobalt Series is its lightweight yet robust construction. Utilizing advanced materials, these tools minimize user fatigue, allowing for prolonged usage without discomfort. The ergonomic design of the handles ensures a comfortable grip, promoting natural hand movements which reduces strain during gardening tasks.

The Cobalt Series integrates smart technology into its product lineup. Many of the tools are equipped with a unique power management system, optimizing battery life and enhancing efficiency. This means users can accomplish more with less time spent recharging. Additionally, select models feature wireless connectivity, allowing gardeners to track their usage, receive maintenance reminders, and access instructional content through a dedicated app.

A key characteristic of the Cobalt Series is versatility. The range includes a variety of tools such as electric trimmers, mowers, and blowers, all designed to tackle different gardening tasks with ease. Each tool is engineered for optimal performance, boasting powerful motors that ensure effective cutting and cleaning. Whether it’s mowing a lawn, trimming hedges, or blowing leaves, users can trust the Cobalt Series to deliver professional results.

Moreover, the Cobalt Series prioritizes safety, incorporating features like automatic shut-off and safety guards. These enhancements not only protect the user but also ensure that the equipment remains in top condition during operation.

In terms of maintenance, the Cobalt Series tools are designed to be hassle-free. Many models include self-cleaning mechanisms and robust components that require minimal upkeep. This focus on reliability means that gardeners can spend more time enjoying their outdoor spaces and less time on repairs.

Finally, with a sleek and modern aesthetic, the Simplicity Cobalt Series not only performs well but also looks great in any garden shed or workspace. Overall, the Cobalt Series is a testament to Simplicity’s dedication to combining innovation with practical gardening solutions. Whether you are rejuvenating your garden or maintaining a landscape, the tools from the Cobalt Series are sure to enhance your gardening experience.
Top Page Image Contents