Simplicity Cobalt Series manual Mowing Height Adjustment, Foot Pedal Adjustment

Page 20

Safety

Controls

Operation

Specifications Troubleshooting Maintenance

Operation

Mowing Height Adjustment

The cutting height adjustment pin (A, Figure 5) controls the mower cutting height. The cutting height is adjustable between 1-3/4” (4,4 cm) and 5” (12,7 cm) in 1/4” (0,64 cm) increments.

1.Depress the deck lift foot pedal (B) until it locks into the 5” (12,7 cm) position.

2.Place the cutting height adjustment pin in the desired cutting height.

3.Depress the deck lift foot pedal then push the lock lever (C) towards the right to release the lock.

4.Release the deck lift foot pedal until it comes to rest against the cutting height adjustment pin.

Foot Pedal Adjustment

The deck lift foot pedal can be adjusted to accommodate the operator’s height for optimal comfort.

To Adjust Pedal Position:

1.Remove the foot pedal (A, Figure 6) from the pedal mount tab (B).

2.Remove the pedal mount hardware (C) and rotate the tab 180 degrees.

3.Reinstall the pedal mount hardware and tighten securely.

4.Reinstall the foot pedal on the pedal mount tab in the proper orientation as shown in Figure 6.

 

C

B

A

 

Figure 5. Mowing Height Adjustment

A.Cutting Height Adjustment Pin

B.Deck Lift Foot Pedal

C.Deck Lift Lock Lever

B

AC

OPTIONAL

POSITION

Figure 6. Foot Pedal Adjustment

A.Deck Lift Foot Pedal

B.Pedal Mount Tab

C.Pedal Mount Hardware

18

www.simplicitymfg.com

Page 19 Page 21
Image 20
Page 19 Page 21
Contents 30HP Zero-Turn Riders Mfg. No Description 5900763Date Purchased Table of Contents Operator Safety Operating SafetyRead the Manual ChildrenMoving Parts Slope OperationThrown Objects Overhead Obstacles Roll Bar UseRetaining Walls, Drop-offs, and Water Fuel and Maintenance Enclosed AreasSafety Controls Operation Troubleshooting MaintenanceSpecifications General OperationTowed Equipment Ride-On Units EmissionsIgnition System Operating on steep slopes can be dangerousSafe Handling of Gasoline Service and MaintenanceService & Maintenance Inspection of the Roll Bar Protective Structure Roll Bar InstructionsOperational Warnings Inspection and Maintenance of the Roll Bar Seat Belt Safety Controls Operation Safety DecalsSafety Interlock System Operational Safety ChecksSafety Icons North American Safety IconsFeatures and Controls Identification NumbersCE Models CE Identification Tag MarkingsSafety Controls Operation Maintenance TroubleshootingPTO Power Take Off Switch Parking BrakeIgnition Switch Hour Meter / Maintenance ReminderSeat Adjustment Lever Throttle ControlChecks Before Starting General Operating SafetyOperation Seat Adjustment Check Tire PressuresPushing the Rider by Hand Tire PressureTo Adjust Pedal Position Mowing Height AdjustmentFoot Pedal Adjustment Stopping the Rider Insert the key into the ignition switch and turn it toStarting the Engine Zero-Turn Driving Practice Forward Travel PracticeSmooth Travel Reverse Travel PracticePractice Turning Around a Corner Practice Turning In PlaceExecuting an End-Of-Row Zero Turn TurningSpecifications Troubleshooting Raise and Lower the Roll BarTo Lower the Roll Bar To Raise the Roll BarMowing Mowing RecommendationsHeight of Grass Tall Grass Requires Incremental CuttingMowing Methods Attaching a Trailer Proper MulchingMulching Requires Excellent Mowing Conditions How Much Grass to MulchCheck Rider / Mower for loose hardware Regular MaintenanceMaintenance Schedule Checking / Adding Fuel Fuel FilterChange Oil & Filter Remove the shop cloth and wipe up any spilled oilChange Interval Every 250 Hours Filter Part Number Change Hydraulic Oil FilterCheck Hydraulic Oil Level Lubrication GreaseOil Lubricating the Front CastersSafety Controls Operation Troubleshooting Maintenance Servicing The Mower BladesInspecting the Mower Blades Never weld or straighten bent mower bladesReinstalling the Mower Blades SpecificationsBattery Charging Battery MaintenanceCleaning the Battery and Cables Keep open flames and sparks away from the batteryGround Speed Control Lever Adjustment Speed Balancing AdjustmentNeutral Adjustment Return-to-Neutral AdjustmentChecking the Adjustment AdjustmentParking Brake Adjustment Hydraulic Pump Drive Belt ReplacementSuspension Adjustment To adjust the spring pre-loadSpring loaded components can kick back causing injury To adjust the upper mounting position Rear ShocksDeck Lift Rod Timing Adjustment Regular Maintenance Deck Lift SpringMower Belt Replacement To avoid damaging belts, do not pry belts over pulleysTroubleshooting Safety ControlsOperation Specifications Troubleshooting Maintenance Troubleshooting the RiderTroubleshooting the Rider Troubleshooting the MowerOperation Maintenance Troubleshooting Common Cutting ProblemsSpecifications Technical ManualsControls Operation HP Briggs & StrattonOperation Controls Safety This page Intentionally Blank Product Quick Specs Belts and Blades

Cobalt Series specifications

The Simplicity Cobalt Series is an innovative line of gardening equipment that blends performance, durability, and ease of use. Designed for both amateur gardeners and seasoned professionals, the Cobalt Series reflects a commitment to cutting-edge technology and thoughtful design, making garden maintenance enjoyable and efficient.

One of the standout features of the Cobalt Series is its lightweight yet robust construction. Utilizing advanced materials, these tools minimize user fatigue, allowing for prolonged usage without discomfort. The ergonomic design of the handles ensures a comfortable grip, promoting natural hand movements which reduces strain during gardening tasks.

The Cobalt Series integrates smart technology into its product lineup. Many of the tools are equipped with a unique power management system, optimizing battery life and enhancing efficiency. This means users can accomplish more with less time spent recharging. Additionally, select models feature wireless connectivity, allowing gardeners to track their usage, receive maintenance reminders, and access instructional content through a dedicated app.

A key characteristic of the Cobalt Series is versatility. The range includes a variety of tools such as electric trimmers, mowers, and blowers, all designed to tackle different gardening tasks with ease. Each tool is engineered for optimal performance, boasting powerful motors that ensure effective cutting and cleaning. Whether it’s mowing a lawn, trimming hedges, or blowing leaves, users can trust the Cobalt Series to deliver professional results.

Moreover, the Cobalt Series prioritizes safety, incorporating features like automatic shut-off and safety guards. These enhancements not only protect the user but also ensure that the equipment remains in top condition during operation.

In terms of maintenance, the Cobalt Series tools are designed to be hassle-free. Many models include self-cleaning mechanisms and robust components that require minimal upkeep. This focus on reliability means that gardeners can spend more time enjoying their outdoor spaces and less time on repairs.

Finally, with a sleek and modern aesthetic, the Simplicity Cobalt Series not only performs well but also looks great in any garden shed or workspace. Overall, the Cobalt Series is a testament to Simplicity’s dedication to combining innovation with practical gardening solutions. Whether you are rejuvenating your garden or maintaining a landscape, the tools from the Cobalt Series are sure to enhance your gardening experience.
Top Page Image Contents