Simplicity Cobalt Series manual Safety Interlock System, Operational Safety Checks, Safety Icons

Page 14

Safety

Controls

Operation

Specifications Troubleshooting Maintenance

Operator Safety

Safety Interlock System

This unit is equipped with safety interlock switches. These safety systems are present for your safety, do not attempt to bypass safety switches, and never tamper with safety devices. Check their operation regularly.

Operational SAFETY Checks

Test 1 — Engine should NOT crank if:

•PTO switch is engaged, OR

•Parking brake is not engaged, OR

•Motion control handles are not in the NEUTRAL position.

Test 2 — Engine SHOULD crank if:

•PTO switch is NOT engaged, AND

•Parking brake is engaged, AND

•Motion control handles are locked in the NEUTRAL position.

Test 3 — Engine should SHUT OFF if:

•Operator rises off seat with PTO engaged, OR

•Operator rises off seat with parking brake disengaged.

•Operator moves motion control handles out of their neutral positions before disengaging parking brake.

Test 4 — Blade Brake Check

Mower blades and mower drive belt should come to a complete stop within five (5) seconds after electric PTO switch is turned off (or operator rises off seat). If mower drive belt does not stop within five (5) seconds, see your dealer.

NOTE: Once the engine has stopped, PTO switch must be turned off, parking brake must be engaged, and the motion control handles must be locked in the NEUTRAL position after the operator returns to the seat in order to start the engine.

WARNING

If the unit does not pass a safety test, do NOT operate it. See your authorized dealer. Under no circumstance should you attempt to defeat the purpose of the safety interlock system.

Safety Icons

The alert symbol () is used to identity safety information about hazards that can result in personal injury. A signal word (DANGER, WARNING, or CAUTION) is used with the alert symbol to indicate the likelihood and the potential severity of the injury. In addition, a hazard icon may be used to represent the type of hazard. An explanation of hazard levels and icons are as follows:

DANGER

This indicates a hazard which, if not avoided, will result in

serious injury or death.

WARNING

This indicates a hazard which, if not avoided, could result in serious injury or death.

CAUTION

This indicates a hazard which, if not avoided, might result in serious injury or death.

NOTICE

This message presented without the alert symbol indicates a situation where the unit or property could be damaged.

North American Safety Icons

Alert

Toxic Fumes

Read the

Open Flame

Manual

Hazard

 

 

Fire Hazard

Amputation -

Amputation -

Amputation -

Rotating Parts

Hand In Blade

Foot In Blade

 

Thrown

Hot Surface

Wear

Pinch Point

Objects

Protective Gear

 

 

Rollover

Overhead

Tipover

Dropoffs

Hazard

Obstacles

 

 

Slippery

Keep Children

Kickback

Remove

Slopes

Away

Key Before

 

 

 

 

Servicing

12

www.simplicitymfg.com

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 30HP Zero-Turn Riders Mfg. No Description 5900763Date Purchased Table of Contents Read the Manual Operator SafetyOperating Safety ChildrenMoving Parts Slope OperationThrown Objects Overhead Obstacles Roll Bar UseRetaining Walls, Drop-offs, and Water Fuel and Maintenance Enclosed AreasSpecifications SafetyControls Operation Troubleshooting Maintenance General OperationIgnition System Towed Equipment Ride-On UnitsEmissions Operating on steep slopes can be dangerousSafe Handling of Gasoline Service and MaintenanceService & Maintenance Inspection of the Roll Bar Protective Structure Roll Bar InstructionsOperational Warnings Inspection and Maintenance of the Roll Bar Seat Belt Safety Controls Operation Safety DecalsSafety Icons Safety Interlock SystemOperational Safety Checks North American Safety IconsCE Models Features and ControlsIdentification Numbers CE Identification Tag MarkingsPTO Power Take Off Switch Safety Controls Operation MaintenanceTroubleshooting Parking BrakeSeat Adjustment Lever Ignition SwitchHour Meter / Maintenance Reminder Throttle ControlChecks Before Starting General Operating SafetyOperation Pushing the Rider by Hand Seat AdjustmentCheck Tire Pressures Tire PressureTo Adjust Pedal Position Mowing Height AdjustmentFoot Pedal Adjustment Stopping the Rider Insert the key into the ignition switch and turn it toStarting the Engine Smooth Travel Zero-Turn Driving PracticeForward Travel Practice Reverse Travel PracticeExecuting an End-Of-Row Zero Turn Practice Turning Around a CornerPractice Turning In Place TurningTo Lower the Roll Bar Specifications TroubleshootingRaise and Lower the Roll Bar To Raise the Roll BarHeight of Grass MowingMowing Recommendations Tall Grass Requires Incremental CuttingMowing Methods Mulching Requires Excellent Mowing Conditions Attaching a TrailerProper Mulching How Much Grass to MulchCheck Rider / Mower for loose hardware Regular MaintenanceMaintenance Schedule Change Oil & Filter Checking / Adding FuelFuel Filter Remove the shop cloth and wipe up any spilled oilChange Interval Every 250 Hours Filter Part Number Change Hydraulic Oil FilterCheck Hydraulic Oil Level Oil LubricationGrease Lubricating the Front CastersInspecting the Mower Blades Safety Controls Operation Troubleshooting MaintenanceServicing The Mower Blades Never weld or straighten bent mower bladesReinstalling the Mower Blades SpecificationsCleaning the Battery and Cables Battery ChargingBattery Maintenance Keep open flames and sparks away from the batteryGround Speed Control Lever Adjustment Speed Balancing AdjustmentChecking the Adjustment Neutral AdjustmentReturn-to-Neutral Adjustment AdjustmentParking Brake Adjustment Hydraulic Pump Drive Belt ReplacementSpring loaded components can kick back causing injury Suspension AdjustmentTo adjust the spring pre-load To adjust the upper mounting position Rear ShocksDeck Lift Rod Timing Adjustment Regular Maintenance Deck Lift SpringMower Belt Replacement To avoid damaging belts, do not pry belts over pulleysOperation Specifications Troubleshooting Maintenance TroubleshootingSafety Controls Troubleshooting the RiderTroubleshooting the Rider Troubleshooting the MowerOperation Maintenance Troubleshooting Common Cutting ProblemsControls Operation SpecificationsTechnical Manuals HP Briggs & StrattonOperation Controls Safety This page Intentionally Blank Product Quick Specs Belts and Blades

Cobalt Series specifications

The Simplicity Cobalt Series is an innovative line of gardening equipment that blends performance, durability, and ease of use. Designed for both amateur gardeners and seasoned professionals, the Cobalt Series reflects a commitment to cutting-edge technology and thoughtful design, making garden maintenance enjoyable and efficient.

One of the standout features of the Cobalt Series is its lightweight yet robust construction. Utilizing advanced materials, these tools minimize user fatigue, allowing for prolonged usage without discomfort. The ergonomic design of the handles ensures a comfortable grip, promoting natural hand movements which reduces strain during gardening tasks.

The Cobalt Series integrates smart technology into its product lineup. Many of the tools are equipped with a unique power management system, optimizing battery life and enhancing efficiency. This means users can accomplish more with less time spent recharging. Additionally, select models feature wireless connectivity, allowing gardeners to track their usage, receive maintenance reminders, and access instructional content through a dedicated app.

A key characteristic of the Cobalt Series is versatility. The range includes a variety of tools such as electric trimmers, mowers, and blowers, all designed to tackle different gardening tasks with ease. Each tool is engineered for optimal performance, boasting powerful motors that ensure effective cutting and cleaning. Whether it’s mowing a lawn, trimming hedges, or blowing leaves, users can trust the Cobalt Series to deliver professional results.

Moreover, the Cobalt Series prioritizes safety, incorporating features like automatic shut-off and safety guards. These enhancements not only protect the user but also ensure that the equipment remains in top condition during operation.

In terms of maintenance, the Cobalt Series tools are designed to be hassle-free. Many models include self-cleaning mechanisms and robust components that require minimal upkeep. This focus on reliability means that gardeners can spend more time enjoying their outdoor spaces and less time on repairs.

Finally, with a sleek and modern aesthetic, the Simplicity Cobalt Series not only performs well but also looks great in any garden shed or workspace. Overall, the Cobalt Series is a testament to Simplicity’s dedication to combining innovation with practical gardening solutions. Whether you are rejuvenating your garden or maintaining a landscape, the tools from the Cobalt Series are sure to enhance your gardening experience.
Top Page Image Contents